Xerox 300x Manual Do Utilizador
Troubleshooting
6
User Manual
6-11
If the head convergence test pattern resembles the following
example, select a number that is lower than the current setting to
move the center line to the left. For example, if the current setting
is +0, select –1. (Factory default is 0.)
example, select a number that is lower than the current setting to
move the center line to the left. For example, if the current setting
is +0, select –1. (Factory default is 0.)
If the proper head convergence cannot be achieved by using the
–4
–4
to +4 range, there may be a problem with the printer. Call your
dealer or Tektronix service.
6.
Press the
TEST PRINT
button several times to return to this
message.
Utilities
Vx.xx
Exit Next
7.
Press the
CLEAN PRINT HEAD
button to exit the Utilities mode.
8.
Make another test print to check the results.
8344RN-5
+
- -