Xerox 4510 Manual Suplementar
Printer Settings
Phaser® 4510 Laser Printer
4-3
Setting Control Panel Accessibility Behavior
Control panel accessibility settings modify the control panel behavior to improve accessibility
for some individuals with disabilities. There are two control panel accessibility settings:
for some individuals with disabilities. There are two control panel accessibility settings:
■
Off: The control panel times out after a short period of no activity. Holding down a key
results in multiple entries of that key.
results in multiple entries of that key.
■
On: The control panel does not time out. Holding down a key does not result in multiple
entries of that key.
entries of that key.
To adjust the control panel accessibility settings, use one of the following options:
■
The printer’s control panel
■
CentreWare IS
Using the Control Panel
To turn on/off control panel accessibility on the control panel:
1.
Select
Printer Setup
, and then press the OK button.
2.
Select
Control Panel Setup
, and then press the OK button.
3.
Select
Accessible Control Panel
, and then press the OK button.
4.
Select
On
or
Off
, and then press the OK button.
Using CentreWare IS
To turn on/off control panel accessibility using CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left navigation panel.
5.
Select Printer Defaults.
6.
In the Accessible Control Panel drop-down list, select On or Off to change the setting.
7.
Click the Save Changes button at the bottom of the screen.