Xerox 360 Guia Do Utilizador
PhaserShare Networking Manual
35
TCP/IP Host Configuration (UNIX)
5.
Perform the appropriate step for your HP-UX version:
■
Version 9.x. Highlight Printers and Plotters from the menu. Press Return or
click Open.
click Open.
■
Version 10.x. Double-click the Printers and Plotters icon.
6.
Perform the appropriate step for your HP-UX version:
■
Version 9.x. Highlight Printers/Plotters from the menu. Press Return or click
Open.
Open.
■
Version 10.x. Again, double-click the Printers and Plotters icon.
7.
From the Actions menu, select Add Remote Printer/Plotter.
8.
Fill in the fields. For example entries and descriptions, see next table, Fields. Access
SAM's help utility for additional information about these fields.
SAM's help utility for additional information about these fields.
9.
To save your changes, click OK at the bottom of the window.
10.
When you are asked about sending a test file to the printer, type no. (It is recommended
that you do not let SAM send a test file because it may not be compatible with your
printer.)
that you do not let SAM send a test file because it may not be compatible with your
printer.)
11.
Exit SAM:
a.
From the File menu, select Exit.
b.
Click Exit SAM.
Fields
Field name
Example entry
Description
Printer Name
phaser360PS
The name you use to access the printer.
You can use any name you want.
You can use any name you want.
Remote System name
tekphaser
The name that you entered in your
/etc/hosts file as the remote
machine name.
machine name.
Remote Printer Queue
Name
Name
PS
Queue name that the printer recognizes:
■
PS for PostScript
■
PCL for text
■
HPGL for HP7475A
■
AUTO for automatic selection.
Remote cancel model
rcmodel
-
Remote status model
rsmodel
-
Printer class (version 9.x) -
Optional
Remote printer is on a
BSD system?
BSD system?
-
Check the box for a BSD system.