Xerox 6121MFP Guia Do Utilizador
Features
Phaser 6121MFP Multifunction Printer
User Guide
27
3. Select the desired amount of time for the printer to sit idle before going into sleep mode: 5 min, 15
min, 30 min, or 60 min.
4. Press OK.
Setting the Brightness of the Control Panel Menu
This setting controls the contrast between the control panel menu background and the control panel
menu text.
menu text.
To set the brightness of the control panel menu:
1. On the printer control panel, press the Back/Menu button to enter the System Menu, then press
1. On the printer control panel, press the Back/Menu button to enter the System Menu, then press
the Down Arrow button to go to General Setup and then press the OK button.
2. Arrow down to LCD Contrast and press OK.
3. To lighten the background (increase the contrast), press the Back Arrow button. To darken the
3. To lighten the background (increase the contrast), press the Back Arrow button. To darken the
background (decrease the contrast), press the Forward Arrow button. As you press each button,
the contrast changes so you can see what each setting will look like.
the contrast changes so you can see what each setting will look like.
4. Press OK.
Setting the Control Panel Speaker Volume
Note:
This setting only applies to Phaser 6121MFP/N and D/ printer configurations.
The speaker volume controls how loud the button touch sound and alerts sounds are.
To set the control panel speaker volume:
1. On the printer control panel, press the Back/Menu button to enter the System Menu, then press
1. On the printer control panel, press the Back/Menu button to enter the System Menu, then press
the Down Arrow button to go to General Setup and then press the OK button.
2. Arrow down to Speaker Volume and press OK.
3. Select the desired speaker volume, from Off to loudest setting: Off, Low2, Low1, Low, High.
4. Press OK.
3. Select the desired speaker volume, from Off to loudest setting: Off, Low2, Low1, Low, High.
4. Press OK.
Setting the Printer’s Default Mode
This setting controls the default mode the printer sets to each time the printer is turned on.
To set the printer’s default mode:
1. On the printer control panel, press the Back/Menu button to enter the System Menu, then press
1. On the printer control panel, press the Back/Menu button to enter the System Menu, then press
the Down Arrow button to go to General Setup and then press the OK button.
2. Arrow down to Initial Mode and press OK.
3. Select the desired mode:
3. Select the desired mode:
• Copy
• Scan
•
• Scan
•
Fax (Phaser 6121MFP/N or /D printer configurations only)
4. Press OK.