Xerox 8560MFP Manual Suplementar

The Tray 2–N prompt setting specifies the amount of time the prompt displays on the control 
panel after paper is loaded in Trays 2–N. The Tray 2–N prompt requests the user to confirm 
the current tray setup or to specify the correct paper type for the print job.

To select a duration setting for Tray 2–N prompts, use one of the following options:

■

The printer’s control panel

■

CentreWare IS

To select the Tray 2–N prompt setting on the control panel:

Press the System button.

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Select the appropriate duration, and then press the OK button.

To select the Tray 2–N prompt setting using CentreWare IS:

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field.

Click Properties.

Select General on the left navigation panel, and then select System Defaults.

Select the appropriate prompt setting in the Tray 2–N Prompt drop-down list.

Click the Save Changes button at the bottom of the page.

Turns the tray setup prompt off.

Displays the tray setup prompt for 30 seconds after paper is loaded in Trays 2–N.

Displays the tray setup prompt after paper is loaded in Trays 2

–

N until a selection is 

made on the control panel.