Sigma DP2 Manual Do Utilizador
85
VIEWING IMAGES ON A TV
The DP2 camera can be connected to a television or a video
device using the provided AV cable, allowing the recorded images
to be viewed on the television monitor or recorded on video
recording media.
device using the provided AV cable, allowing the recorded images
to be viewed on the television monitor or recorded on video
recording media.
TO CONNECT THE CAMERA TO A
VIDEO DEVICE
VIDEO DEVICE
1
Open the connector cover.
2
Connect the AV cable to the＜USB / AV＞
terminal on the camera body.
terminal on the camera body.
3
Connect the yellow AV cable plug into the
video input terminal and the white plug
into the audio terminal of the TV
video input terminal and the white plug
into the audio terminal of the TV
4
Turn on the camera and video device.
WARNING !!
•
Please do not use any video cable other than the one provided with
your Sigma DP2 camera. Using other brands may cause damage.
your Sigma DP2 camera. Using other brands may cause damage.
TIP
•
It is recommended that the camera be powered with the AC
adapter (optional) during television playback to avoid draining the
battery.
adapter (optional) during television playback to avoid draining the
battery.
•
The default mode for the video signal is NTSC. When connecting
the camera to a PAL device, the Video Mode setting in the Camera
Set-up menu must be changed. (See P.112)
the camera to a PAL device, the Video Mode setting in the Camera
Set-up menu must be changed. (See P.112)