Gestetner 1045 Guia Do Utilizador
Windows 2000 Configuration
20
2
D
After the confirmation message appears, click [Yes].
E
Acknowledge the [Remove Shared File?] dialog box.
F
When the uninstallation is complete, click [OK].
Setting Up the Printer Driver
The following procedure allows you to configure the printer port to use Smart-
NetMonitor for Client.
NetMonitor for Client.
Preparation
The target printer must be turned on before starting the installation process.
The target printer must be turned on before starting the installation process.
A
Install the printer driver for the printer you want to use.
B
From the [Printers] window, click the icon of the printer. On the [File] menu,
click [Properties].
click [Properties].
C
Click the [Ports] tab and click [Add Port].
D
Click [SmartNetMonitor for Client] in the [Available port types:] box, and then
click [New Port].
The [Select Printer] dialog box appears and printers on the network are
browsed.
The displayed items are as follows:
Model Name: The model name of the printer.
Name: The name of Network Interface Board.
Comment: Additional information about Network Interface Board.
Address: The IP address of the printer.
click [New Port].
The [Select Printer] dialog box appears and printers on the network are
browsed.
The displayed items are as follows:
Model Name: The model name of the printer.
Name: The name of Network Interface Board.
Comment: Additional information about Network Interface Board.
Address: The IP address of the printer.
E
Select the printer.
TCP/IP
A Click the printer you want to use, and then click [OK].
Note
❒ Printers that respond to an IP broadcast from the computer will be dis-
played. To print to a printer not listed here, click [Specify Address] and
then type the IP address or host name.
then type the IP address or host name.