Gestetner c7528 Manual Suplementar
Troubleshooting
109
When you use IEEE 1394
interface board.
interface board.
A
Check the IEEE 1394 interface board is attached to the com-
puter correctly.
puter correctly.
B
Check the IEEE 1394 interface cable is connected securely.
C
Restart the computer.
If the error occurs even after executing the above, proceed to
the following steps.
If the error occurs even after executing the above, proceed to
the following steps.
D
Unplug the IEEE 1394 interface cable connected to the printer.
E
Execute the utility tool for IEEE 1394 interface board is stored
in the following path on the CD-ROM labeled “Printer Drivers
and Utilities”.
in the following path on the CD-ROM labeled “Printer Drivers
and Utilities”.
UTILITY\1394
❒ For details about using the utility tool for IEEE 1394, see the
README file in the same directory on the CD-ROM.
How is the signal strength
when using the wireless
LAN?
when using the wireless
LAN?
❖ Ad Hoc Mode or 802.11 Ad Hoc Mode
Either move to a location where the signal is good or remove
obstructions.
obstructions.
❖ Infrastructure Mode
Check the signal status from the “Maintenance” menu on the
control panel. If the signal is poor, either move to a location
where it is good or remove obstructions.
control panel. If the signal is poor, either move to a location
where it is good or remove obstructions.
How is the signal strength
when using Bluetooth?
when using Bluetooth?
Try the following:
•
Check that the Bluetooth interface unit is installed properly.
•
Check that there are no obstructions between the computer,
printer, and other devices.
printer, and other devices.
•
Change the location of the computer.
•
Change the location of the printer.
Possible cause
Solutions