Gestetner c7528 Guia De Utilização
Making Printer Settings Using the Control Panel
178
❖ Tray Switching
Specify the printer to change printing to the suitable tray, when printer driver
specifies different paper size or type from the current tray.
specifies different paper size or type from the current tray.
• Off
• On
❒ Default: Off
❖ RAM Disk
If the hard disk is not installed for PDF Direct Print, select a value of 2 MB or
higher.
This menu appears only when the hard disk is not installed.
higher.
This menu appears only when the hard disk is not installed.
• 0 MB
• 2 MB
• 4 MB
• 8 MB
• 16 MB
❒ Default: 4 MB
❒ When the amount of SDRAM is small and RAM Disk is set to 16 MB, print-
ing may not be possible depending on the print job and duplex printing may
be canceled. If this happens, increase the amount of SDRAM, or set RAM
Disk to 8 MB or less.
be canceled. If this happens, increase the amount of SDRAM, or set RAM
Disk to 8 MB or less.
For details about the optional SDRAM module, see Setup Guide.
❖ Notify by E-mail
You can specify whether or not to send an error message to a preset e-mail
address when an error occurs in the printer.
address when an error occurs in the printer.
• Off
• On
❒ After changing the setting, turn off the power of the printer briefly, and then
turn it on again.
❒ Default: On
For information, see Web Image Monitor Help.