Gestetner c7528 Guia De Utilização
Making Printer Settings Using the Control Panel
180
• 256 KB
❒ Default: 128 KB
❖ I/O Timeout
You can set how many seconds the printer should wait before ending a print
job. If printing operation is frequently interrupted by data from other ports, you
can increase the timeout period.
job. If printing operation is frequently interrupted by data from other ports, you
can increase the timeout period.
• 10 seconds
• 15 seconds
• 20 seconds
• 25 seconds
• 60 seconds
❒ Default: 15 seconds
❖ Network Setup
You can make network-related settings.
For details, see “Configuration”, Setup Guide.
❖ DHCP 1394
You can select [On] or [Off] to use DHCP with TCP/IP.
• On
• Off
❒ Default: On
❖ IP Address
You can specify the IP address.
❒ When DHCP is set to on, the IP address cannot be changed. To change
it, set DHCP to off. Contact your network administrator for information
about the network configuration.
about the network configuration.
❒ Default: 011.022.033.044
❖ Subnet Mask
You can specify the subnet mask.