Gestetner 3245e Guia De Utilização
Scan Settings
41
2
Image Density (Contrast)
The text and diagrams in your origi-
nal should stand out clearly from the
paper they are written on. If your
original has a darker background
than normal (for example, a newspa-
per clipping), or if the writing is faint,
adjust the image density.
By default, this machine will auto-
matically select a density setting ap-
propriate to the original (Auto Image
Density). If you wish to set the densi-
ty yourself, use Manual Image Densi-
ty.
nal should stand out clearly from the
paper they are written on. If your
original has a darker background
than normal (for example, a newspa-
per clipping), or if the writing is faint,
adjust the image density.
By default, this machine will auto-
matically select a density setting ap-
propriate to the original (Auto Image
Density). If you wish to set the densi-
ty yourself, use Manual Image Densi-
ty.
Auto Image Density
The machine automatically selects an
image density which is the most ap-
propriate for the original.
By default, Auto Image Density is se-
lected when the machine is turned on
or modes are cleared. You can change
this with the User Parameters.
image density which is the most ap-
propriate for the original.
By default, Auto Image Density is se-
lected when the machine is turned on
or modes are cleared. You can change
this with the User Parameters.
⇒
P.227 “Changing the User Parameters”
A
If the Auto Image Density indica-
tor is not lit, press the
tor is not lit, press the
l
l
l
l key to
turn it on.
Manual Image Density
Use the Image Density keys to vary
the image density within 5 levels.
the image density within 5 levels.
A
Make sure that the Auto Image
Density indicator is not lit. If it is
lit press the
Density indicator is not lit. If it is
lit press the
l
l
l
l key to turn it off.
B
Press the
i
i
i
i or j
j
j
j key to change
the density. The indicators above
the keys show the level.
the keys show the level.
Mixing Scan Settings in a
Multiple Page Original
Multiple Page Original
When sending an original consisting
of several pages, you can select differ-
ent Image Density, Resolution and
Original Type settings for each page.
Set your original, select the scan set-
tings for the first page, dial and press
the
of several pages, you can select differ-
ent Image Density, Resolution and
Original Type settings for each page.
Set your original, select the scan set-
tings for the first page, dial and press
the
{
Start
} key as you would normal-
ly. Then follow one of the following
two procedures.
two procedures.
When Setting Originals on the Exposure
Glass
Glass
While the machine is bleeping, you
have about 60 seconds (10 for Imme-
diate Transmission) to select density,
resolution and original type. The re-
maining time is shown on the display.
have about 60 seconds (10 for Imme-
diate Transmission) to select density,
resolution and original type. The re-
maining time is shown on the display.
Chapter2 Page 41 Thursday, January 27, 2000 1:54 PM