Gestetner 3245e Guia De Utilização

35

This section explains the possible causes and the actions to take when the scan-
ner does not scan an image in the expected manner.

The scanned image is dirty. The exposure glass (platen 

glass) or the platen cover is 
dirty.

Clean the exposure glass 
(platen glass) or the platen 
cover.

The scanned image is dis-
torted or out of position.

The original was moved 
while it was being scanned.

Do not move the original 
while it is being scanned.

The original was not 
pressed flat against the ex-
posure glass (platen glass).

Confirm that the original is 
pressed flat against the ex-
posure glass (platen glass).

The scanned image is up-
side down.

The original was placed 
upside down.

Place the original in the 
correct direction.      

The original image cannot 
be scanned.

The original was placed 
with the front and the back 
reversed.

When setting originals on 
the exposure glass (platen 
glass), place the side to be 
scanned face down; when 
setting originals in the doc-
ument feeder (ADF), place 
the side to be scanned face 
up.     

The image density has 
changed in the middle of 
the scan.

Some types of originals 
may cause the density to 
change in the middle of a 
scan.

Set the Erase Background 
to "off" and scan the origi-
nal again.