Gestetner dsm622 Manual Do Utilizador

User Tools (System Settings)

54

❖

❖

❖

❖ <F/F4> Size Setting

Currently three types of F size are available; 8

1

/

2

"

×13"L, 8

1

/

4

"

×13"L and

8"

×13"L. The ADF or exposure glass cover sensor cannot distinguish these

three types of originals. This function sets the F size from the ADF or expo-
sure glass cover sensor. Auto Paper Select or Auto Reduce/Enlarge can be
used for F size originals based on this setting.

❒ Default: 8

×13"L

❒ You cannot interrupt the current job with a different function job that speci-

fies stapling or sorting.

❒ You can interrupt the current job with an ordinary copy job or facsimile re-

ception. The output tray used when the job is interrupted varies depending
on the type of finisher shift tray and output tray specified for interruption.

❖

❖

❖

❖ When 500–sheet finisher is the finisher shift tray:

• When the output tray specified for the interrupting job is the finisher

tray, the interrupting job will be delivered to internal tray 1.

• When the output tray specified for the interrupting job is not the finish-

er tray, the interrupting job will be delivered to the specified output
tray.

❖

❖

❖

❖ When 1000–sheet finisher is the finisher shift tray:

• When the output tray specified for the interrupting job is the finisher

tray, the interrupting job will be delivered to the finisher upper tray.

• When the output tray specified for the interrupting job is not the finish-

er tray, the interrupting job will be delivered to the specified output
tray.

❒ When the 500–sheet finisher or 1000–sheet finisher is installed and stapling is

specified for a job, the job will be delivered to the finisher shift tray, regardless
of the output tray specified.

RussianC3_ENgsg-F_FM.book  Page 54  Monday, June 16, 2003  6:48 PM