Gestetner f9103 Guia De Utilização
105
9. Maintaining Your Machine
Loading paper in the Optional Paper Tray
Unit
Unit
AAAA
Make sure that the optional paper
tray unit is not being used.
tray unit is not being used.
BBBB
Pull out the paper tray until it
stops.
stops.
CCCC
While pinching the release lever,
adjust the back fence and side
fences.
adjust the back fence and side
fences.
DDDD
Push the metal plate down, and
then square the paper and load it
in the tray.
then square the paper and load it
in the tray.
Important
❒ If paper is left in the paper tray
and then you add paper, a mis-
feed might occur.
feed might occur.
❒ Do not stack paper over the lim-
it mark. Load paper so that the
paper touches the right side of
the tray, or misfeeds might oc-
cur.
paper touches the right side of
the tray, or misfeeds might oc-
cur.
Note
❒ Shuffle the paper before loading
it in the tray.
❒ If the paper is curled, load the
paper up side down.
EEEE
Readjust the back fence and side
fences.
fences.
Important
❒ When loading small quantities
o f p ape r, be car eful n ot to
squeeze in the side fence too
much or paper will not be fed
properly.
squeeze in the side fence too
much or paper will not be fed
properly.
FFFF
Push the paper tray in until it
stops.
stops.
StellaF1EN-3_FM.book Page 105 Monday, November 12, 2001 11:40 AM