Arecont Vision av10005 Guia Do Utilizador

ARECONT VISION USER MANUAL

Arecont Vision 425 E Colorado St, 7

Floor Glendale, CA 91205 Revised 5/9/2010

www.arecontvision.com

•

freq

freq – frequency of AC powered light sources (valid values are 50 and 60)

•

lowlight

lowlight – low light mode of the camera, allows tradeoff between frame rate and image quality (valid
values are balance, speed, quality, highspeed, moonlight). If highspeed is used, an additional
parameter shortexposures

shortexposures

shortexposures can be set with valid values from 1 to 10.

•

rotate

rotate – image rotation (valid values are 0 and 180)

•

autoexp

autoexp – allows to turn on and off auto exposure (valid values are on and off)

•

expwndleft

expwndleft - left coordinate of user-defined auto-exposure measurement window (valid values should
fall within sensor window)

•

expwndtop

expwndtop - top coordinate of user-defined auto-exposure measurement window (valid values should
fall within sensor window)

•

expwndwidth

expwndwidth - width of user-defined auto-exposure measurement window (valid values should fall
within sensor window)

•

expwndheight

expwndheight – height of user-defined auto-exposure measurement window (valid values should fall
within sensor window)

•

sensorleft

sensorleft - left coordinate of sensor window (valid values defined by sensor size)

•

sensortop

sensortop - top coordinate of sensor window (valid values defined by sensor size)

•

sensorwidth

sensorwidth - width of sensor window (valid values defined by sensor size; this value affects sensor
frame rate)

•

sensorheight

sensorheight - height of sensor window (valid values defined by sensor size; this value affects sensor
frame rate)

•

imgleft

imgleft - left coordinate of the default image returned in response to the simple request

http://ip_address/img.jpg

(valid values should fall within the camera’s sensor window)

imgtop

imgtop - top coordinate of the default image returned in response to the simple request

http://ip_address/img.jpg

(valid values should fall within the camera’s sensor window)

•

imgwidth

imgwidth – width of the default image returned in response to the simple request

http://ip_address/img.jpg

(valid values should fall within the camera’s sensor window)

•

imgheight

imgheight - height of the default image returned in response to the simple request

http://ip_address/img.jpg

(valid values should fall within sensor window)

•

imgquality

imgquality – quality setting of the image returned in response to the simple request

http://ip_address/img.jpg

(valid values 1 to 21)

•

imgres

imgres – resolution of the default image returned in response to the simple request

http://ip_address/img.jpg

(valid values are full and half, where half is used to request images

decimated by a factor of 2 in both directions)

•

auto

auto----iris

iris

iris – allows to enable and disable auto-iris (valid values are on and off)

•

irisgain

irisgain – allows to specify threshold for closing the auto-iris (valid values are from 8 to 255)