Preh mc 15 Guia Do Utilizador
3.4 Mechanical Adjustment of the LCD Position
The LCD of the Preh Touch Commander is swingable and tillable. According to the usage
the LCD position can be changed.
The below picture shows the model with the multimedia base.
Pict. 6: adjusting screws on rear side
The infinitely variable adjustment of the tilting force can be made with two adjusting screws
located on the rear of the monitor. The adjustment torque (1 - 8 Nm) should be about the
same on both screws.
Pict. 7: adjusting screws below
The infinitely variable adjustment of the swinging force can be made with two adjusting
screws in the base of the monitor. The adjustment torque (1 - 8 Nm) should be about the
same on both screws.
Note: On changing the housing position you should be careful to not get your fingers too
near to the opening on the rear side of the housing as they might get pinched there.
13 3.2005