Lanzar sts65bt Guia Do Utilizador
23
OPERATION
BLUETOOTH OPERATION
Bluetooth Mode Selection
Tap
icon on Main Menu will enter
Bluetooth mode. And the Bluetooth
interface will be displayed:
interface will be displayed:
Pairing
Tap
icon on the screen to enter
BT Setup interface:
1) Tap PAIR bar on the screen, you will
see “Waiting” appear on lower right of
the screen.
the screen.
2) Turn the phone to Bluetooth menu, then
scan Bluetooth set and enter the pairing
password (default pin is 1234) to
connect Bluetooth set after successful
scan.
If pairing is successful, “OK” will be
displayed on the screen. At this time, if
you tap PAIR bar, the current pairing
would be broken.
password (default pin is 1234) to
connect Bluetooth set after successful
scan.
If pairing is successful, “OK” will be
displayed on the screen. At this time, if
you tap PAIR bar, the current pairing
would be broken.
3) Tap CONNECT bar to connect or
disconnect the phone.
4) Tap BT-AUDIO bar to change the sound
between the unit and your phone.
5) Tap MANUAL-ANSWER bar will
change the phone answer mode from
manually to automatically. And the
character will change to “AUTO-ASK”
manually to automatically. And the
character will change to “AUTO-ASK”
6) Tap
will return to the Bluetooth
interface.
Note: When your phone receive a short
Note: When your phone receive a short
message,
icon will be
displayed on the Bluetooth interface,
but you can not read the message by
the unit.
but you can not read the message by
the unit.
Dial the Phone Number
1) Dail a phone number manually In
Bluetooth menu, tap the numeric icons
to input the phone number then tap
to input the phone number then tap
to confirm.
Or you can input the phone number by
pressing the numeric buttons on the
pressing the numeric buttons on the
remote control then tap
to
confirm.
2) Dial a phone number by voice
Tap
icon on the Bluetooth main
menu, “After the tone, say a name or
voice command” will appear on the
screen. You can dial a phone number
by the voice stored in system
beforehand.
Note:
voice command” will appear on the
screen. You can dial a phone number
by the voice stored in system
beforehand.
Note:
a. When you input a number
icon
will become to
icon, you can
delete the wrong number by tapping
this icon.
this icon.
b.Only your mobile phone supports
voice dialing, can this function be
used.
used.
c. If you on the line and there comes a
TA information,
will appear on
the screen, you can select the function
according to your own need.
according to your own need.
Pick up/ Hung up a Phone Call
In AUTO-ASK mode, when a call
coming the unit will answer the call
automatically.
In MANUAL-ANSWER mode, when a
coming the unit will answer the call
automatically.
In MANUAL-ANSWER mode, when a
call coming, tap
to pick up the
phone . Tap
to hung up the
phone.