ONKYO DV-CP701 Manual De Instruções

18

Connecting the DV-CP701—Continued

This section explains how to connect the DV-CP701 to a ste-
reo hi-fi amp or receiver for better sound quality than that of 
most TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DV-CP701. DVD-Video discs and Video 
CDs will sound better too. You can also enjoy Dolby Pro 
Logic, so long as your receiver supports it.

Use an RCA/phono audio cable to connect the DV-CP701’s 
ANALOG AUDIO OUTPUTs to a pair of analog audio 
inputs on your hi-fi amp or receiver, as shown.

• When you use the analog audio outputs, don’t play DTS 

CDs or don’t select DTS soundtracks on DVD-Video discs. 
Doing so will produce unpleasant digital noise, which may 
damage your equipment.

Use an optical (or coaxial) digital audio cable to connect the 
DV-CP701’s OPTICAL (or COAXIAL) DIGITAL AUDIO 
OUTPUT to an optical (or coaxial) input on your hi-fi amp or 
receiver, as shown.

• Be sure to set the Digital Out–>Dolby Digital setting to 

“Dolby Digital>PCM” (see page 41). Otherwise an 
unpleasant digital noise may be heard, which may damage 
your equipment.

• Never connect the DV-CP701 to the AC-3RF input on a 

Dolby Digital receiver. The AC-3RF format is not sup-
ported by the DV-CP701.

To enjoy Dolby Digital or DTS surround sound, you need to 
connect one of the DV-CP701 digital audio outputs to the 
digital input on a Dolby Digital or DTS decoder or an AV 
receiver with built-in decoders.

This hookup example will also allow you to enjoy Dolby Pro 
Logic, so long as your decoder or AV receiver supports it.

• Make sure that the Digital Out–>Dolby Digital setting to 

“Dolby Digital” (see page 41). Otherwise you won’t get 
surround sound.

• Also refer to the connection information supplied with 

your AV receiver or decoder.

• When playing Dolby Digital or DTS source material, be 

sure to select Dolby Digital or DTS decoding, respectively, 
on your AV receiver or decoder. See the relevant manuals.

• You can experience Dolby Digital only with DVDs that 

bear the Dolby Digital logo. Likewise, you can experience 
DTS only with DVDs or CDs that bear the DTS logo.

(white)

(white)

(red)

(red)

Signal flow

Connect one or the other

Signal flow

Signal flow

AV component with
Dolby Digital/DTS decoder

Connect one or the other