ONKYO dv-m301 Manual De Instruções
14
Rear Panel
1
VIDEO OUT jack
Connect the VIDEO OUT jack to the video input on a
TV or monitor or to an AV component with video input
capability. When using this jack, be sure to set VIDEO
SELECT to the top position (pages 15 and 18).
TV or monitor or to an AV component with video input
capability. When using this jack, be sure to set VIDEO
SELECT to the top position (pages 15 and 18).
2
VIDEO IN jack
Connect the VIDEO IN jack to the video output of
another DV-M301 changer or another component
with video output capability (pages 67).
another DV-M301 changer or another component
with video output capability (pages 67).
3
S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear
picture reproduction is possible by connecting the
S-VIDEO OUT jack to your TV or monitor using a
commercially available S-video cable. When using
this jack, be sure to set VIDEO SELECT to the top
position (pages 16 and 18).
picture reproduction is possible by connecting the
S-VIDEO OUT jack to your TV or monitor using a
commercially available S-video cable. When using
this jack, be sure to set VIDEO SELECT to the top
position (pages 16 and 18).
4
S-VIDEO IN jack
Connect the S-VIDEO IN jack to another DV-M301
changer or component with S-video output capability
(page 67).
changer or component with S-video output capability
(page 67).
5
VIDEO SELECT switch
Use to set which output is used to output the video
signals. Set to the top position for composite video
and S-video output and to the bottom position for
component video output (pages 15, 16, and 18).
signals. Set to the top position for composite video
and S-video output and to the bottom position for
component video output (pages 15, 16, and 18).
6
COMPONENT VIDEO OUT jacks
If your TV, projection monitor, projector, or similar
component has component video inputs, you can
produce a high quality picture by connecting to the
component video outputs on this unit. When using
these jacks, be sure to set VIDEO SELECT to the
bottom position (page 18).
component has component video inputs, you can
produce a high quality picture by connecting to the
component video outputs on this unit. When using
these jacks, be sure to set VIDEO SELECT to the
bottom position (page 18).
7
AUDIO OUT jacks
Connect to the stereo audio inputs of a TV or stereo
AV component. If you are connecting to an AV
component that has both digital and analog input
jacks for DVD player connection, it may be beneficial
to make both connections (pages 15 and 17).
AV component. If you are connecting to an AV
component that has both digital and analog input
jacks for DVD player connection, it may be beneficial
to make both connections (pages 15 and 17).
8
AUDIO IN jacks
Connect to the analog audio outputs of another
DV-M301 or component with audio output capability
(page 66).
DV-M301 or component with audio output capability
(page 66).
9
MASTER-SLAVE CONTROL jacks
Connect two DV-M301 changers for singular control
of both changers and a total of 601 discs. Connect
the MASTER jack on the changer to be used as the
“Master” to the SLAVE jack of a second “Slave”
changer using the supplied Master-Slave control
cord. Do not attempt to make connections to other
components using this jack (page 66).
of both changers and a total of 601 discs. Connect
the MASTER jack on the changer to be used as the
“Master” to the SLAVE jack of a second “Slave”
changer using the supplied Master-Slave control
cord. Do not attempt to make connections to other
components using this jack (page 66).
0
DIGITAL (OPTICAL) OUT jack
Connect the DIGITAL (OPTICAL) OUT to the digital
optical input of an AV component with a
built-in decoder, etc. to output the digital audio signal
recorded on discs. (page 17).
optical input of an AV component with a
built-in decoder, etc. to output the digital audio signal
recorded on discs. (page 17).
-
DIGITAL (COAXIAL) OUT jack
Connect the DIGITAL (COAXIAL) OUT to the digital
coaxial input of an AV component to output the digital
audio signal recorded on discs (pages 16 and 17).
coaxial input of an AV component to output the digital
audio signal recorded on discs (pages 16 and 17).
=
DIGITAL (COAXIAL) IN jack
Connect the DIGITAL (COAXIAL) IN jack of another
DV-M301 changer or another component with digital
output (coaxial) capability (page 66).
DV-M301 changer or another component with digital
output (coaxial) capability (page 66).
MASTER-SLAVE
CONTROL
CONTROL
MASTER
SLAVE
OUT
DIGITAL
(OPTICAL)
DIGITAL
(COAXIAL)
OUT
IN
OUT
IN
OUT
IN
VIDEO
S VIDEO
VIDEO SELECT
COMPONENT
VIDEO OUT
OUT
IN
Y
P
B
P
R
AUDIO
27122711
UDD1N
VNA2176
R
L
1
2
4
3
5
6
0
7
8
9
-
=