ONKYO dv-m301 Manual De Instruções

This changer features S-video, composite, and
component video output possibilities. Check the manual
supplied with your TV or monitor to determine the best
possible connection for your system.

In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size.
You can use the [Setup Navigator] in the Setup screen
General to set whether you are using a wide screen or
standard size TV or monitor (page 21). Additionally, you
can use the [TV Screen] setting in the Setup screen
Video menu (page 43).

• Make component video connections to a TV, projection

monitor, or projector with component inputs for an
exceptional video image that best portrays the high
quality digital video recorded on DVDs.

• Use a commercially available component video cable

or 3 video cords to connect the COMPONENT VIDEO
OUT jacks on the changer to the component jacks on
the monitor.

• When making component video connections, make

sure to set VIDEO SELECT on the rear panel of the
changer to the bottom position to assign component
video output.

• Make composite video connections to a standard TV

or monitor with a video input jack.

• Use the supplied video cable to connect the VIDEO

OUT jack on the changer to the video input on the TV
or monitor.

• Be sure to match the color of the plug with the color

of the jack (yellow).

• When making video connections, make sure to set VIDEO

SELECT on the rear panel of the changer to the top
position to assign composite video output.

• Make S-video connections to a TV or monitor with

S-video input to produce a high quality video image.

• Use a commercially available S-video cable to connect

the S-VIDEO OUT jack on the changer to an S-video
input on the TV or monitor.

 • When making S-video connections, make sure to set

VIDEO SELECT on the rear panel of the changer to
the top position to assign S-video output.