ONKYO dv-s717 Manual De Instruções

Connections

Intr

oduction

Warning

• Do not set “Audio Out Select to “Bitstream” from the menu 32 38 unless you are connecting (via the DIGITAL OUTPUT jack) an AV

decoder that has the Dolby Digital or Digital Theater System (DTS) decoding function. High volume sound may damage your hearing as well
as the speakers.

• When playing DTS-encoded discs (DVD videodisc and audio CDs), excessive noise may be exhibited from the analog stereo jacks. To avoid

possible damage to the audio system, you should take proper precautions when the ANALOG OUTPUT jacks of the DVD player is connected
to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must
be connected to the DIGITAL OUTPUT jack of the DVD player.

Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and
now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full
benefit or 5.1 channel DTS encoded sound tracks on DVD video
discs or audio CDs.

Connecting to an Amplifier Equipped With a DTS Decoder

• Use DVD video discs or audio CDs encoded via the

DTS recording system.

• Make the following setting

Setting

Select:

Page

Audio Out Select

Bitstream

Recording system

DTS

2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo
by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).

Connecting to an Amplifier Equipped With a Digital Audio Input

• Make the following setting

Setting

Select:

Page

Audio Out Select

PCM

•

DO NOT connect the DIGITAL OUTPUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This input on you’re A/V Receiver
is reserved for Laserdisc use only and is incompatible with the DIGITAL OUTPUT jack of the DVD player.

•

Connect the DIGITAL OUTPUT jack of the DVD player to the “DIGITAL” or “COAXIAL” input of a Receiver or Processor.

•

Refer to the Instruction manual of the connected equipment as well.

•

When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.

•

The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.

•

Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be damaged.

Notes:

VIDEO OUT

S VIDEO

VIDEO

ANALOG
OUTPUT

DIGITAL
OUTPUT

REMOTE

CONTROL

COAXIAL OPTICAL

Signal flow

Connection
example

To COAXIAL type
digital audio input

Front
speaker
(right)

Front
speaker
(left)

Optical digital cable

Amplifier equipped with a
DTS decoder

Rear speaker
(left surround)

Rear speaker
(right surround)

Sub
woofer

To OPTICAL type digital audio
input