ONKYO HT-S4100 Guia Do Utilizador

 

45

 

■

 

The iPod adapter needs to be adjusted to match your par-
ticular iPod. If there’s a gap between the back of your iPod 
and the adapter, turn the adapter counterclockwise to close 
the gap. Turning the adapter counterclockwise moves it 
forward. Turning it clockwise moves it backward.

 

■

 

When you turn on the AV 

receiver, the iPod turns on as well.

 

When you turn off the AV 

receiver, the iPod turns off as well. 

 

If you start iPod play-

back while the AV receiver is on Standby, the AV 
receiver will automatically turn on and select your iPod 
as the input source. Then, your iPod will start playback.

 

If you start iPod play-

back while listening to another input source, the AV 
receiver will automatically select your iPod as the input 
source.

 

When you use the AV 

receiver’s Dimmer function to change its display’s 
brightness, the brightness of the RI Dock’s Power indi-
cator will change as well.

 

You 

can use the AV receiver’s remote controller to control 
basic iPod functions.

 

  * If you use your iPod’s controls to start an iPod slideshow or 

video, this function will not work, so use the remote controller 
instead.

 

• The RI Dock must be connected to the AV receiver 

with both an 

 cable and an audio cable to use the 

 functions.

• Before selecting a different input source, stop iPod 

playback to prevent the AV receiver from selecting the 
iPod input source by mistake.

• If any accessories are connected to your iPod, the AV 

receiver may not be able to select the input source 
properly.

• While your iPod is in the RI Dock, its volume control 

has no effect. If you adjust your iPod’s volume control 
while it’s in the RI Dock, make sure it’s not set too 
high before you reconnect your headphones.

 

■

 

You can use your iPod’s Alarm Clock function to auto-
matically turn on your iPod and the AV receiver at a 
specified time. The AV receiver’s input source will auto-
matically be set to the input to which your iPod is con-
nected.

 

■

 

The RI Dock charges your iPod’s battery while your 
iPod is in the RI Dock.

Forward

Backward

Notes:
• To prevent iPod connector damage, don’t twist your 

iPod when inserting or removing it, and be careful 
not to knock over the RI Dock while your iPod is 
inserted.

• Don’t use the RI Dock with any other iPod accesso-

ries, such as FM transmitters and microphones, as 
they may cause a malfunction.

Note:
• The AV receiver may take several seconds to star-

tup, so you might not hear the first few seconds of 
the first song.

Notes:
• To use this function, your iPod must be in the RI 

Dock, and the RI Dock must be connected to the 
AV receiver with both an 

 cable and an audio 

cable.

• When you use this function, be sure to set the AV 

receiver’s volume control to a suitable level.

• The AV receiver may take several seconds to star-

tup, so you might not hear the first few seconds of 
the first song.

Notes:
• To charge your iPod battery, the AC adapter must be 

plugged into a suitable wall outlet and connected to 
the RI Dock’s DC IN jack.

• See your iPod’s instruction manual for more infor-

mation on battery charging.

HT-S4100_En.book Page 45 Friday, February 22, 2008 2:15 PM