ONKYO dv-sp504 Guia Do Utilizador
23
Connecting the DVD player
—Continued
Connecting the Multichannel Analog
Output
Connect the DVD player’s FRONT/D.MIX 1 or 2,
SURR 1, CENTER, and SUBWOOFER jacks to the
multichannel analog audio input on your AV receiver.
SURR 1, CENTER, and SUBWOOFER jacks to the
multichannel analog audio input on your AV receiver.
You can use three stereo audio cables for this.
■
If Your AV Receiver has a 7.1-channel Analog
Audio Input
Audio Input
Connect the DVD player’s SURR 1 jacks to your AV
receiver’s surround input jacks, and connect the
SURR 2 jacks to your AV receiver’s surround back
input jacks. The SURR 1 and SURR 2 outputs output
the same signals.
receiver’s surround input jacks, and connect the
SURR 2 jacks to your AV receiver’s surround back
input jacks. The SURR 1 and SURR 2 outputs output
the same signals.
When you make this connection, set the SURR MODE
switch to “1+2.”
If you use this connection, the output level will be
reduced by 3 dB (i.e., the volume level will be reduced
slightly).
switch to “1+2.”
If you use this connection, the output level will be
reduced by 3 dB (i.e., the volume level will be reduced
slightly).
• The remote controller supplied with Onkyo AV
receiver or amplifiers can be used to control the DVD
player.
player.
• The function of the upper and lower
connectors
are the same. Connect to either one.
• To use
, in addition to an
connection, you must
also make an analog audio connection (RCA) between
the DVD player and your other
the DVD player and your other
-capable compo-
nents.
SURR1
ANALOG
CENTER
1
2
FRONT/D. MIX
AUDIO OUTPUT
SUB
WOOFER
R
L
FRONT
SUB
SURR
CENTER
AV receiver
Connecting -compatible
Components
Components
REMOTE
CONTROL
REMOTE
CONTROL
L
R
IN
1
2
FRONT/D. MIX
AV receiver
DV-SP504E_En.book Page 23 Monday, August 28, 2006 4:25 PM