ONKYO dv-sp504 Guia Do Utilizador

 

46

 

With this setting you can select a picture format to match 
the aspect ratio of your TV.

 

Choose 

this option if you have a standard 
TV (4:3 aspect ratio). When you 
watch widescreen DVD-Video 
movies, the entire picture will be 
visible and there will be black 
bars at the top and bottom of the screen, as shown.

 

Choose this 

option if you have a standard TV 
(4:3 aspect ratio) and want to use 
the full height of the screen when 
watching widescreen 
DVD-Video movies. In order to 
use the full height of the screen, the picture will be 
cropped on both sides, as shown. This option won’t 
work with discs that don’t support pan and scan.

 

Choose this option if you have a 

widescreen TV (16:9 aspect ratio). Depends on TV, 
the picture appears stretched when watching programs 
in 4:3 format.

 

Choose 

this option if you have a 
widescreen TV (16:9 aspect 
ratio) and the picture appears 
stretched when watching 
programs in 4:3 format. This 
option will correct the issue.

 

• This setting does not apply to DVD menus.
• When the HDMI OUT signal is at a resolution of 720p 

or 1080i, programs in 4:3 format will appear stretched, 
so we recommend that you select the 16:9 Com-
pressed option.

• With some DVD-Video discs this setting may have no 

effect. See the disc’s sleeve notes to see which picture 
format is used.

 

With this setting you can adjust the aspect of the picture 
so that it fits your TV screen. Due to your TV’s aspect 
ratio setting and the DVD’s aspect ratio, black bars may 
appear above and below the picture or at the sides and the 
aspect of the picture may be unsuitable. In this case, use 
this setting to adjust the aspect of the picture as you like.

 

The picture is displayed in its 

original aspect ratio.

 

The picture is stretched horizontally 

to make it fit the height of the screen.

 

The picture is stretched vertically to 

make it fit the width of the screen.

 

The picture is stretched horizontally 

and vertically.

 

The view mode can also be changed by 
using the remote controller’s [ASPECT] 
button.

 

• This setting does not apply to DVD menus.

 

With this setting you can turn the HDMI video output on 
or off. See page 43 for more information.

 

Video is output by the HDMI OUT.

 

Video is not output by the HDMI OUT.

 

This setting can also be changed by using the [HDMI] 
button on the front panel (see page 43).

 

• When this setting is set to On, video is output by the 

analog video outputs only when the HD Resolution is 
set to 480p/576p.

 

With this setting you can set the component video output 
to progressive or interlaced. While the HDMI Output 
Setting is set to On, this setting is fixed at Progressive 
and cannot be changed. See page 43 for more informa-
tion.

 

Component video output is interlaced.

 

Component video output is progressive.

 

When the HDMI Output Setting is set to Off, you can 
also change this setting by using the [RESOLUTION] 
button on the front panel (see page 43).

DV-SP504E_En.book Page 46 Monday, August 28, 2006 4:25 PM