ONKYO ht-s3400 Manual Do Utilizador

En

Here you can specify the distance from each speaker to the 
listening position so that the sound from each speaker 
arrives at the listener’s ears as the sound designer 
intended.

• These settings are disabled when:

– a pair of headphones is connected, or
– the  “Audio TV Out” setting is set to “On” (

page 35), or

– “HDMI Ctrl (RIHD)” is set to “On” (

page 34) and 

you’re listening through your TV speakers, or

– Speakers B is on, or
– Speakers A is off.

• Speakers that you set to “No” or “None” in the “Sp Config 

page 29) cannot be selected.

■

`

feet:

Distances can be set in feet. Range: 1ft to 30ft in 
1 foot steps.

`

meters:

Distances can be set in meters. Range: 0.3m to 9.0m 
in 0.3 meter steps.

(The default setting varies from country to country.)

■

`

Specify the distance from the each speaker to your 
listening position.

Here you can adjust the level of each speaker with the 
built-in test tone so that the volume of each speaker is the 
same at the listening position.

■

*1

`

–12 dB to 0 dB to +12 dB in 1 dB step.

■

*1

`

 –15 dB to 0 dB to +12 dB in 1 dB step.

Default setting: 0 dB (excluding European models), 
+3 dB (European models)

• Speakers that you set to “No” or “None” in the “Sp Config 

(Speaker Configuration)” (

page 29) cannot be selected.

• These settings cannot be calibrated in either of the following 

cases:
– a pair of headphones is connected.
– Speakers B is on.
– Speakers A is off.
– the  “Audio TV Out” setting is set to “On” (

– “HDMI Ctrl (RIHD)” is set to “On” (

page 34) and 

you’re listening through your TV speakers.

– the AV receiver is muted.

*1

For the center speaker and subwoofer, the level settings made 
by using AUDIO are saved here as the default settings.

• If you’re using a handheld sound level meter, adjust the level of 

each speaker so that it reads 75 dB SPL at the listening position, 
measured with C-weighting and slow reading.

• To fully enjoy Audyssey Dynamic EQ

®

 (

page 32) and 

Audyssey Dynamic Volume

®

 (

page 32), we recommend 

that you manually adjust the level of each speaker using the 
above-mentioned settings.