ONKYO ht-s3400 Manual Do Utilizador

En

Controlling Other Components

With the UP-A1 Dock, you can easily play the music, 
photo, or movie stored on your Apple iPod/iPhone 
through the AV receiver and enjoy great sound.
You can use the AV receiver’s remote controller to 
operate your iPod/iPhone.

■

Auto Power On
If you start iPod/iPhone playback while the AV receiver 
is on Standby, the AV receiver will automatically turn 
on and select your iPod/iPhone as the input source.

Direct Change
If you start iPod/iPhone playback while listening to 
another input source, the AV receiver will automatically 
select your iPod/iPhone as the input source.

Using the AV receiver’s Remote Controller
You can use the AV receiver’s remote controller to 
control basic iPod/iPhone functions (

■

You can use your iPod/iPhone models Alarm Clock 
function to automatically turn on your iPod/iPhone and 
the AV receiver at a specified time. The AV receiver’s 
input source will automatically be set to the PORT 
selector.

• To use this function, your iPod/iPhone must be in the UP-A1 

Dock, and the UP-A1 Dock must be connected to the AV 
receiver.

• This function works only in the Standard mode (

page 40).

• When you use this function, be sure to set the AV receiver’s 

volume control to a suitable level.

• You cannot use this function for sound effects on your 

iPod/iPhone.

• “UP-A1 ChargeMode” must be set to “On” to enable the Alarm 

Clock (

■

The UP-A1 Dock charges your iPod/iPhone models 
battery while your iPod/iPhone is in the UP-A1 Dock 
connected to the AV receiver. While your iPod/iPhone is 
seated in the UP-A1 Dock, its battery will be charged 
when the AV receiver is set to On or Standby.
You can specify how the power is fed to your iPod/iPhone 
when the AV receiver is in Standby Mode (

• When UP-A1 Dock that seated iPod/iPhone is connected, the 

power consumption on standby mode slightly increases.

Dock is sold separately. Models sold are different 
depending on the region.
For the latest information on the Onkyo Dock 
components, see the Onkyo web site at: 
http://www.onkyo.com
Before using the Onkyo Dock components, update 
your iPod/iPhone with the latest software, available 
from the Apple web site.
For supported iPod/iPhone models, see the 
instruction manual of the Onkyo Dock.

The AV receiver may take several seconds to startup, so 
you might not hear the first few seconds of the first 
song.

■

• Functionality depends on your iPod/iPhone model and 

generation.

• Before selecting a different input source, stop iPod/iPhone 

playback to prevent the AV receiver from selecting the 
iPod/iPhone input source by mistake.

• If any accessories are connected to your iPod/iPhone, the AV 

receiver may not be able to select the input source properly.

• When connecting UP-A1 Dock to the radio tuner UP-HT1 

(North American, Central American and South American 
models)/UP-DT1 (European and Asian models) with 
AUTO selected by the tuner’s Mode Selector switch, you can 
switch the input source between UP-A1 Dock and the tuner, 
by pressing PORT repeatedly on the front panel.

• While your iPod/iPhone is in the UP-A1 Dock, its volume 

control has no effect. If you adjust your iPod/iPhone models 
volume control while it’s in the UP-A1 Dock, make sure it’s 
not set too high before you reconnect your headphones.

• The Auto Power On function will not work if you set your 

iPod/iPhone in the UP-A1 Dock while it is playing.

• Do not turn off the power with the iPod/iPhone still connected 

to this unit via the UP-A1 Dock.

• Set your iPod/iPhone in the UP-A1 Dock after the AV 

receiver turns on.

• “UP-A1 ChargeMode” must be set to “On” to enable the 

Auto Power On and Direct Change functions (