ONKYO ht-s7200 Manual Do Utilizador
41
If you connect a component to a digital input jack, you
must assign that jack to an input selector. For example, if
you connect your CD player to the OPTICAL IN1 jack,
you should assign that jack to the CD input selector. By
default, the COAXIAL IN1 jack is assigned to the DVD/
BD input selector, although this can be changed.
Here are the default assignments.
must assign that jack to an input selector. For example, if
you connect your CD player to the OPTICAL IN1 jack,
you should assign that jack to the CD input selector. By
default, the COAXIAL IN1 jack is assigned to the DVD/
BD input selector, although this can be changed.
Here are the default assignments.
Notes:
• If you connect an input component (such as UP-A1
• If you connect an input component (such as UP-A1
series Dock that seated iPod) to the UNIVERSAL
PORT jack, you cannot assign any input to PORT
selector.
PORT jack, you cannot assign any input to PORT
selector.
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
and [ENTER] button.
Digital Input Setup
Input selector
Default assignment
DVD/BD
COAX1
VCR/DVR
- - - - -
CBL/SAT
COAX2
GAME
OPT1
AUX
- - - - -
TV/TAPE
- - - - -
TUNER
- - - - - (Fixed)
CD
OPT2
PORT
- - - - -
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [
q]/[w] but-
tons to select “1. Input Assign”,
and then press [ENTER].
The “Input Assign” menu appears.
and then press [ENTER].
The “Input Assign” menu appears.
3
Use the Up and Down [
q]/[w] but-
tons to select “3. Digital Audio
Input”, and then press [ENTER].
The “Digital Audio Input” menu
appears.
Input”, and then press [ENTER].
The “Digital Audio Input” menu
appears.
1. Input
Assign
1. HDMI
Input
2. Component
Video
Input
3. Digital Audio Input
1–3. Digital Audio Input
DVD/BD
VCR/DVR
CBL/SAT
GAME
AUX
TV/TAPE
VCR/DVR
CBL/SAT
GAME
AUX
TV/TAPE
TUNER
CD
PORT
PORT
COAX 1
- - - - -
COAX 2
OPT 1
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
OPT 2
- - - - -
- - - - -
4
Use the Up and Down [
q]/[w] but-
tons to select an input selector,
and use the Left and Right
[
and use the Left and Right
[
e]/[r] buttons to select
“COAX1”, “COAX2”, “OPT1”,
“OPT2”, or “- - - - - (analog)”.
• When an HDMI IN is assigned to an
“OPT2”, or “- - - - - (analog)”.
• When an HDMI IN is assigned to an
input selector in “HDMI Input
Setup” on page 39, this input assign-
ment is automatically set to the same
HDMI IN. And in addition to the
usual inputs (e.g., COAX1, COAX2,
etc.), you can also select HDMI
inputs.
Setup” on page 39, this input assign-
ment is automatically set to the same
HDMI IN. And in addition to the
usual inputs (e.g., COAX1, COAX2,
etc.), you can also select HDMI
inputs.
• Press the [ENTER] button when you
do not use the signal of audio from
the HDMI IN. The “ ” mark is dis-
played like “COAX1 ”.
the HDMI IN. The “ ” mark is dis-
played like “COAX1 ”.
Examples:
If you connect your DVD/BD player to
the OPTICAL IN 1 jack, set “DVD/
BD” to “OPT1”.
If you want to listen to audio from the
component connected to the OPTICAL
IN 2 jack when the VCR/DVR input
selector is selected, set “VCR/DVR” to
“OPT2”.
If you want to listen to audio from the
component connected to the
COAXIAL IN 1 jack when the CBL/
SAT input selector is selected, set
“CBL/SAT” to “COAX1”.
For the input selector that you want to
listen the analog audio, set to “- - - - -”
in the Digital Audio Input setting and
HDMI Input setting (see page 39).
If you connect your DVD/BD player to
the OPTICAL IN 1 jack, set “DVD/
BD” to “OPT1”.
If you want to listen to audio from the
component connected to the OPTICAL
IN 2 jack when the VCR/DVR input
selector is selected, set “VCR/DVR” to
“OPT2”.
If you want to listen to audio from the
component connected to the
COAXIAL IN 1 jack when the CBL/
SAT input selector is selected, set
“CBL/SAT” to “COAX1”.
For the input selector that you want to
listen the analog audio, set to “- - - - -”
in the Digital Audio Input setting and
HDMI Input setting (see page 39).
5
Press the [SETUP] button.
The setup menu closes.
The setup menu closes.
*
*