ONKYO ht-s870 Manual De Instruções

 

32

 

With 

 (Remote Interactive) you can control your 

-compatible Onkyo CD player, DVD player, and so 

on with the HT-R820THX’s remote controller, and use 
the following special 

 functions:

 

When you start playback on a component connected via 

, if the HT-R820THX is in Standby, it will turn on 

and select that component as the input source automati-
cally. Similarly, when the HT-R820THX is set to 
Standby, all components connected via 

 also enter 

Standby. This function will not work if the component’s 
power cord is connected to the HT-R820THX’s AC 
OUTLET.

 

When playback is started on a component connected via 

, the HT-R820THX automatically selects that com-

ponent as the input source. If your DVD player is con-
nected to the HT-R820THX’s multichannel input, you 
must press the [MULTI CH] button to enjoy all channels 
(see page 35). This is because the Direct Change 

 

function only selects the FRONT DVD IN sockets.

 

You can use the HT-R820THX’s remote controller to 
control other 

-compatible Onkyo components.

 

• Push plugs in all the way to make good connections.
• Use only 

 cables for 

 connections. 

 cables 

are supplied with Onkyo players (DVD, CD, etc.).

• Some components have two 

 sockets, you can con-

nect either one to the HT-R820THX. The other is for 
connecting additional 

-compatible components.

• Connect the HT-R820THX’s 

 socket to only 

Onkyo components. Connecting to other manufac-
turer’s components may cause them to malfunction.

• Some components may not support all 

 functions. 

Refer to the manuals supplied with your components.

The HT-R820THX has AC outlet on its rear panel for 
connecting the power cord of another AV component. 
The other component’s power switch can be left in the 
ON position so that it turns on or off when the 
HT-R820THX is set to On or Standby.

 

• Make sure that the capacity of the component that you 

connect to the AC OUTLET does not exceed the stated 
capacity (e.g., 100 W).

 

• Onkyo components with 

 sockets should be con-

nected to regular wall outlets.

Plug the HT-R820THX and SKW-820 power cords into 
suitable wall outlets.

 

• Turning on the HT-R820THX may cause a momen-

tary power surge that might interfere with other elec-
trical equipment on the same circuit. If this is a 
problem, plug the HT-R820THX into a different 
branch circuit.

HT-S870_En.book Page 32 Monday, September 13, 2004 5:15 PM