ONKYO ht-s7100 Guia Do Utilizador

 

99

 

You must use the buttons on the unit to make these set-
tings.
1. While holding down the input selector button for the 

input source that you want to set, press the [SETUP] 
button.

2. Use the Left and Right [

]/[

] buttons to change 

the setting.

3. Press the [SETUP] button when you’ve finished.

 

This setting can be made for the DVD, VCR/DVR, 
CBL/SAT, GAME/TV, or AUX input.
If you have a games console connected to the 
S-Video or composite video input, and the picture 
isn’t very clear, you can attenuate the gain.

 

 (default).

 

 Gain is reduced by 2 dB.

 

The AV receiver contains a microcomputer for signal pro-
cessing and control functions. In very rare situations, 
severe interference, noise from an external source, or 
static electricity may cause it to lockup. In the unlikely event 
that this happens, unplug the power cord from the wall out-
let, wait at least 5 seconds, and then plug it back in again.

Onkyo is not responsible for damages (such as CD 
rental fees) due to unsuccessful recordings caused by 
this unit’s malfunction. Before you record important 
data, make sure that the material will be recorded cor-
rectly.

Before disconnecting the power cord from the wall out-
let, set the AV receiver to Standby.

HT-S7100_En.book Page 99 Friday, July 11, 2008 10:36 AM