ONKYO ht-s9300thx Manual Do Utilizador

En

If you connect a video component to a component video 
input, you must assign that input to an input selector. For 
example, if you connect your Blu-ray Disc/DVD player to 
COMPONENT VIDEO IN 2, you must assign “IN2” to 
the “BD/DVD” input selector. 
Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, 
TV/CD, PORT

`

IN1, IN2:

Select a corresponding component video input that 
the video component has been connected.

`

- - - - -:

Select if you are using HDMI output, not component 
video output, to output composite video and compo-
nent video sources.

• If you connect a component (such as UP-A1 Dock that seated 

iPod) to the UNIVERSAL PORT jack, you cannot assign any 
input to PORT selector.

If you connect a component to a digital audio input, you 
must assign that input to an input selector. For example, if 
you connect your CD player to the OPTICAL IN 1, you 
must assign “OPT1” to the “TV/CD” input selector. 
Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, 
TV/CD, PORT

`

COAX1, COAX2, OPT1, OPT2:

Select a corresponding digital audio input that the 
component has been connected.

`

- - - - -:

Select if the component is connected to an analog 
audio input.

• When  an  HDMI IN is assigned to an input selector in “HDMI 

37), the same HDMI IN will be set as a priority in this 

assignment. In this case, if you want to use the coaxial or optical 
audio input, make the selection in the Audio Selector in the 
Audio menu.

• Available sampling rate for PCM signals from a digital input 

(optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

• If you connect a component (such as UP-A1 Dock that seated 

iPod) to the UNIVERSAL PORT jack, you cannot assign any 
input to PORT selector.

- - - - - (Fixed)

- - - - - (Fixed)