ONKYO ht-s9300thx Manual Do Utilizador

En

■

Dolby D/Dolby D +/TrueHD
With this setting, you can specify the listening mode to 
be used when a Dolby Digital or Dolby Digital Plus for-
mat digital audio signal is played (DVD, etc.). Specifies 
the default listening mode for Dolby TrueHD sources, 
such as Blu-ray or HD DVD (input via HDMI).

■

DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode to 
be used when a DTS or DTS-HD High Resolution for-
mat digital audio signal is played (DVD, LD, CD, etc.). 
Specifies the default listening mode for DTS-HD Mas-
ter Audio sources, such as Blu-ray or HD DVD (input 
via HDMI).

■

Other Multich Source
Specifies the default listening mode for multichannel 
PCM sources from HDMI IN such as DVD-Audio, and 
DSD multichannel sources such as Super Audio CD.

■

`

Display range is “Min”, 1 through 99, “Max”.

`

Display range is –

QdB, –81dB through +18dB.

With this setting, you can choose how the volume level is 
displayed.
The absolute value 82 is equivalent to the relative value 
0 dB.

■

`

QdB (fully muted), –50dB to –10dB in 10 dB steps.

This setting determines how much the output is muted 
when the muting function is used (

■

`

Off, 50 to 99 (Absolute display)

`

Off, –32dB to +17dB (Relative display)

With this setting, you can limit the maximum volume.
To disable this setting, select “Off”.

■

`

Last, Min, 1 to 99 or Max (Absolute display)

`

, –

Q dB, –81dB to +18dB (Relative display)

With this preference, you can specify the volume set-
ting to be used each time the AV receiver is turned 
on.

To use the same volume level that was used when the AV 
receiver was turned off, select “Last”.
The “Power On Volume” cannot be set higher than the 
“Maximum Volume” setting.

■

`

–12dB to 0dB to +12dB

With this preference, you can specify the headphone vol-
ume relative to the main volume. This is useful if there’s a 
volume difference between your speakers and your head-
phones.

■

On Screen Display
This preference determines whether operation details 
are displayed on-screen when an AV receiver function is 
adjusted.

`

On:

Displayed.

`

Off:

Not displayed.

Even when “On” is selected, operation details may not be 
output if the input source is connected to an HDMI IN.

■

TV Format (European models)
For the on-screen setup menus to display properly, you 
must specify the TV system used in your area.

`

Auto:

Select this to automatically detect the TV system 
from the video input signals.

`

NTSC:

Select this if the TV system in your area is NTSC.

`

PAL:

Select this if the TV system in your area is PAL.

■

`

English, Deutsch, Français, Español, Italiano, Ned-
erlands, Svenska, 

中文

This setting determines the language used for the on-
screen setup menus.