ONKYO ht-sr750 Guia Do Utilizador

 

17

 

For detailed information, see the pages in parentheses.

 

A

 

Red:

 Subwoofer in standby mode

Green:  Subwoofer on

With the Auto Standby function, the SKW-540 
automatically turns on when an input signal is 
detected in Standby mode. When there’s no input 
signal for a while, the SKW-540 automatically 
enters Standby mode.

 

B

 

This control is used to adjust the volume of the sub-
woofer.

 

C

 

This RCA input should be connected to the sub-
woofer pre out on the AV receiver with supplied 
RCA cable.

 

The Auto Standby function turns the subwoofer on when 
the input signal exceeds a certain level. If the Auto 
Standby function does not work reliably, try slightly 
increasing or decreasing the subwoofer output level on 
the AV receiver (page 56).

 

1

 

These keyhole slots can be used to wall-mount the 
speaker.

 

2

 

These push terminals are for connecting the speaker 
to your AV Receiver with the supplied speaker 
cables. The supplied speaker cables are color-coded 
for easy identification. Simply connect each cable to 
the same-colored positive speaker terminal.

 

3

 

These threaded inserts can be used to attach the 
speaker either horizontally or vertically to a speaker 
mount or bracket.

 

Use commercially available 1/4" screws to attach 
the speaker to a speaker mount or bracket.

1

2

3

■ Rear

To AC outlet

■ Front

3
2

1

■ Rear

HT-SR750_En.book Page 17 Thursday, August 2, 2007 10:05 AM