ONKYO ht-sr750 Guia Do Utilizador

 

42

 

The multichannel DVD input is for connecting a compo-
nent with a 5.1-channel analog audio output, such as a 
DVD-Audio or SACD-capable DVD player, or an 
MPEG decoder. See page 27 for hookup information.

 

• While the multichannel DVD input is selected, the 

Speaker Configuration settings on page 53 are 
ignored, and signals from the multichannel input are 
fed to the speakers as they are.

You can display various information about the current 
input source as follows.

The following information can typically be displayed:

*1 When AM or FM radio is used, the band, preset num-

ber, and frequency are displayed.

*2 If the input signal is analog, or AM or FM radio is 

selected, no format information is displayed. If the 
input signal is PCM, the sampling frequency is dis-
played. If the input signal is digital but not PCM, the 
signal format is displayed. Information is displayed 
for about 3 seconds, then the previous display reap-
pears.

 

• The listening mode is displayed only when speaker set 

A is on.

 

A: The number of front channels (front left, front right, 

and center).

B: The number of surround channels (surround left and 

surround right). If there’s surround back channel 
information, this number will be 3.

C: LFE channel for subwoofer (1 means yes).

 

The MULTI CH indicator appears on 
the display.

Audio from the multichannel DVD 
input will now be used for the DVD 
input source.

MULTI CH indicator

A

B C

HT-SR750_En.book Page 42 Thursday, August 2, 2007 10:05 AM