ONKYO SKS-HT870 Guia Do Utilizador

En-

16

Connect the UP-A1 to the Universal Port on your Onkyo 
AV receiver as shown.

Functionality depends on your iPod or iPhone model and 
generation and your AV receiver model and generation.

Align your iPod or iPhone with the UP-A1’s dock 
connector and push it down so that it’s fully seated. If 
there’s a gap between the back of your iPod or iPhone 
and the adapter, turn the adapter counterclockwise to 
close the gap. Turning the adapter counterclockwise 
moves it forward. Turning it clockwise moves it 
backward.

Notes:
• Remove the case, if fitted, from your iPod or iPhone 

before inserting it into the UP-A1. Otherwise, a poor 
connection may result in no sound or remote control 
issues.

• To prevent damage to the dock connector, don’t twist 

your iPod or iPhone when inserting or removing it, 
and be careful not to knock over the UP-A1 while your 
iPod or iPhone is inserted.

• Don’t use the UP-A1 with any other iPod or iPhone 

accessories, such as FM transmitters and 
microphones, because they may cause a malfunction.

• Make sure your iPod or iPhone is playing.
• Make sure your iPod or iPhone is inserted properly in 

the UP-A1.

• Make sure your AV receiver is turned on, the correct 

input source is selected, and the volume is turned up.

• Make sure all plugs are pushed in all the way.

• If there’s any noise when listening to FM/AM radio on 

your tuner or receiver, try moving the antenna cable 
away from the UP-A1 and iPod or iPhone. Also, keep 
the antenna cable away from other cables.

Adapter

Dock connector

Onkyo AV receiver

Weight:

170 g (6 ounces)

Dimensions (W 

×

 H 

×

 D):

83 

×

 33 

×

 74 mm

(3-1/4" 

×

 1-5/16" 

×

 2-15/16")

Remove case (if fitted)

HTP-770_EnFrEs.book  Page 16  Wednesday, July 29, 2009  10:07 AM