ONKYO dr-s2.2 Guia Do Utilizador

84

• The power cord (mains lead) is

disconnected.

• The main power is set to OFF.
• There is external noise interfering with the

computer circuits of the DVD Receiver.

• The AC fuse is blown.

• The muting function is activated.
• The DVD Receiver is not properly

connected.

• The amplifier protection circuitry has

activated. (The STANDBY indicator
flashes.)

• Headphones are connected.

• The speakers are not properly connected.
• The listening mode is set to “Stereo” or

“Orchestra.”

• The volume level of the center speaker

(“Center”) is set to minimum.

• A speaker configuration without the center

speaker is selected.

• The TV is not set to receive the output

signals from the DVD Receiver.

• The video connection cable is not

connected securely.

• Only the S video connection is made.

• Another input source is selected.

• Power supply fluctuations or other

abnormalities such as static electricity
may interrupt correct operation.

• The disc is not placed properly on the disc

tray.

• The disc is dirty or warped.
• Region number does not conform with

this unit.

• No disc is inserted.

• An unplayable disc is inserted.
• The disc is placed upside down.

• The disc is not placed within the disc tray

guide.

• The disc is dirty.
• The parental lock function is activated.

• The disc is dirty.
• It is in fast forward or fast reverse

playback.

• Copy protection is activated.

• The TV is not set to receive the output

signals from the DVD Receiver.

• The DVD Receiver is not properly

connected.

• When the power is turned off by power

failure or by unplugging the power cord,
settings will be canceled.

• Check the connection of the power cord

(mains lead).

• Turn on the main power.
• Switch off the main power, then switch it on

again. If not recovered, disconnect the power
cord (mains lead), then connect it again.

• Contact your nearest Onkyo service

center.

• Deactivate the muting function.
• Check the connections to the DVD

Receiver.

• Contact your nearest Onkyo service

center.

• Decrease the volume, then disconnect the

headphones.

• Check the speaker connections.
• No sound is reproduced from the center

speaker when the listening mode is
“Stereo” or “Orchestra.”

• Adjust the volume level of the center

speaker.

• Check that the selected speaker

configuration includes the center speaker.

• Set the TV to the DVD Receiver’s input.

Refer to the instruction manual of TV.

• Check the connections between the DVD

Receiver and TV set.

• Also make video connection.

• Select the appropriate input source.

• Switch off the main power, then switch it on

again. If not recovered, disconnect the power
cord (mains lead), then connect it again.

• Use the disc tray guide to align the disc.

• Refer to “Notes on Discs”.
• If the region number on the disc does not

match the number on the player, the disc
cannot be used

• Insert a disc. (Check that “DVD,” “VCD,”

or “CD” is lit in the DVD Receiver’s
display.)

• Check the playable discs.
• Place the disc with the playback side

down.

• Place the disc within the proper guide on

the disc tray.

• Eject the disc and clean it.
• Deactivate the parental lock function or

change the parental lock level.

• Eject the disc and clean it.
• Sometimes a small amount of picture

distortion may appear. This is not a
malfunction.

• Connect the DVD Receiver directly to the

TV. Avoid connecting the DVD Receiver to
the TV through a VCR.

• Set the TV to the DVD Receiver’s input.

• Check the connections to the DVD

Receiver.

• Before unplugging the power cord, press

STANDBY/ON and check that “--OFF--”
disappears in the display.

The DVD Receiver doesn’t
switch on.

No sound is reproduced.

No sound or very little
sound is reproduced from
the center speaker.

No picture appears on the
TV screen.

The sound of the playback
source is not heard.

The buttons on the remote
controller and DVD
Receiver do not operate.

The disc tray comes back
out automatically, shortly
after the disc tray is closed.

The DVD Receiver does
not start playback.

The playback picture is
occasionally distorted.

Brightness is unstable or
noise is visible on the
playback picture.

The picture from the DVD
Receiver doesn’t appear
on the TV screen.

Settings are canceled.

26

26
26

—

42
16-25

—

43

18, 19
44, 48

33

29, 30

—

16, 17

16, 17

40

26

34

8, 9
4

34

8
34

34

9
75

9
—

16, 17

—

16, 17

—