ONKYO HT-R640 Manual De Instruções

Página de 80
53
Listening to the Radio
—Continued
Setting the Satellite Radio Mode
Selecting XM Satellite Radio
Signing Up for XM Satellite Radio
Before you can use XM Satellite Radio, you must first 
sign up for an account. You’ll need a major credit card 
and your XM Satellite Radio ID, which you can get from 
the AV receiver, as explained below, or from the Passport 
System package and itself.
Notes:
• Channel 0 cannot be selected in Category Search 
mode. You must select Channel Search mode (see 
page 54).
• The following letters are not used in XM Satellite 
Radio IDs: I, O, S, F.
1
On the AV receiver, press the 
[SETUP] button.
2
Use the TUNING Up or Down 
[
]/[
] buttons to select 
“7. Hardware Setup,” and then 
press [ENTER].
3
Use the TUNING Up or Down [
]/
[
] buttons to select “SAT 
Radio,” and then use the PRESET 
[
]/[
] buttons to select “XM.”
Pressing the PRESET [
]/[
] but-
tons cycles through the following SAT 
options: None 
↔ XM.
None: Select if you are not using sat-
ellite radio.
XM: Select to use XM satellite 
radio.
4
Press the [SETUP] button.
Press the [TUNER] input selector 
button repeatedly to select XM.
If “CHECK ANTENNA” appears on 
the display, make sure the XM Passport 
System is connected properly.
TUNER SETUP
TUNING    , PRESET      , ENTER
SETUP
TUNING
PRESET
ENTER
7.Hardware Setup
------------------------
 a.SAT Radio   : None
 b.Remote ID        :1
 c.HDMI Audio Out :Off
 d.SW Input Sensitivity
                 : 0dB
TUNING
PRESET
ENTER
TUNING
PRESET
TUNER
1
Use the TUNING Up and Down 
[
]/[
] buttons to select 
channel 0.
Your XM Satellite Radio ID number is 
displayed. Write it below.
ID                                          
2
To sign up, go to:
http://activate.xmradio.com
Or call: 1-800-967-2346
For XM Canada, go to:
http://xmradio.ca
Or call: 1-877-GET-XMSR
TUNING
PRESET