ONKYO ht-s6500 Guia Do Utilizador

■

`

Off 

`

Turn this setting on to allow 

p

-compatible 

components connected via HDMI to be controlled by the 
AV receiver (

• When the setting is set to “On” and the menu is closed, the names 

of connected 

p-compatible components and “RIHD On” 

are displayed on the AV receiver.
“Search…” 

→ “(name)” → “RIHD On”

When the AV receiver cannot receive the name of the component, 
it is displayed as “Player

” or “Recorder

”, etc (“

” shows up 

and indicates the number of components, when two or more are 
received).

• When  an 

p-compatible component is connected to the 

AV receiver via an HDMI cable, the name of the connected 
component is displayed on the AV receiver display. For example, 
while you are watching TV broadcasting, if you operate a Blu-ray 
Disc/DVD player (being powered on) with the remote control of 
the AV receiver, the name of the Blu-ray Disc/DVD player will 
be displayed on the AV receiver.

• Set it to 

“

”

 when a connected piece of equipment is not 

compatible or it is unclear whether the equipment is compatible 
or not.

• If operation is not normal when set to 

“

”

, change the setting to 

“

”

.

• Refer to the connected component’s instruction manual for 

details.

• When  the  “HDMI Ctrl (RIHD)” setting is set to “On”, the power 

consumption in standby mode slightly increases. (Depending on 
the TV status, the AV receiver will enter standby mode as usual.)

• When the source equipment is connected with the 

u 

connection, it may malfunction if “HDMI Ctrl (RIHD)” is set to 
“On”.

■

`

Off 

`

BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD:

Selects the input source for which the HDMI 
Through function is enabled.

`

Last:

The HDMI Through function is activated on the input 
source selected at the time of setting the AV receiver 
to standby mode.

When enabling the HDMI Through function, regardless of 
whether the AV receiver is on or in standby, both audio 
and video streams from an HDMI input will be output to 
the TV or other components via HDMI connection. The 
HDMI indicator will be dimly-lit in standby mode. Note 
that the indicator may not light under certain conditions 
(

).

This setting is fixed to “Auto” automatically when the 
above “HDMI Ctrl (RIHD)” setting is set to “On”, 
resulting in automatic input source selection.

• Only an input source assigned to an HDMI IN via “HDMI Input” 

is enabled (

• The power consumption in standby mode will increase during the 

HDMI Through function; however in the following cases, the 
power consumption can be saved:
– The TV is in standby mode.
– You are watching a TV program.

• Refer to the connected component’s instruction manual for 

details.

• Depending on the connected component, the correct input source 

may not be selected with the setting fixed to “Auto”.

• This setting is set to “Off” automatically when the “HDMI Ctrl 

(RIHD)” setting is set to “Off”.

■

`

Off 

`

This preference determines whether the incoming audio 
signal is output from the HDMI output. You may want to 
turn this preference on if your TV is connected to the 
HDMI output and you want to listen to the audio from a 
connected component through your TV’s speakers. 
Normally, this should be set to “Off”.

• If “On” is selected and the audio can be output from the TV, the 

AV receiver will output no sound through its speakers. In this 
case, “TV Speaker” appears on the AV receiver’s display by 
pressing DISPLAY.

• When “HDMI Ctrl (RIHD)” is set to “On”, this setting is fixed 

to “Auto”.

• With some TVs and input signals, no sound may be output even 

when this setting is set to “On”.

• When “Audio TV Out” or 

“

HDMI Ctrl (RIHD)” is set to 

“

”

 

and you’re listening through your TV’s speakers (

turning up the AV receiver’s volume control will make the sound 
be output from the AV receiver’s front left and right speakers. To 
stop the AV receiver’s speakers producing sound, change the 
settings, change your TV’s settings, or turn down the AV 
receiver’s volume.

• Listening mode cannot be changed when this setting is set to 

“On” and the input source is not HDMI.

“Setup”