ONKYO nc-500 Manual De Instruções
Other Information
15
Index parts and facilities
Rear Panel
1 OSD OUT
This port can be used to redirect screen output
from the front panel display to a television
screen for quick and easy large-screen
viewing.
from the front panel display to a television
screen for quick and easy large-screen
viewing.
2 ETHERNET
This port connects to a broadband mode,
router, hub, etc.
router, hub, etc.
3 AM
This port connects to the AM radio antenna.
4 FM
This port connects to the FM radio antenna.
5 SPEAKERS
The terminals connect to the speakers.
6 VARIABLE OUTPUT
This port connects to an amplifier without
volume control.
volume control.
7 FIXED OUT
This port connects to the input port of a
receiver with volume control.
receiver with volume control.
ETHERNET
SPEAKERS
( 6 OHMS MIN. )
ANTENNA
AUX
IN
OUT
OUT
OUT
FIXED VARIABLE
OSD
AM
FM
75
R
L
27123044
UDD
R
L
R
L
AUDIO NETWORK RECEIVER
MODEL NO.
NC-
500
IN
IR
8 AUX
This port connects to an auxiliary device.
9 IR IN
If the NC-500 is located inside a rack or a
cabinet that will not allow infrared beams to
reach its IR sensor, you will need to relay
beams with an external sensor.
Connect the external sensor to IR IN input.
Then, place the sensor in an unblocked
location at which you can easily point with
the remote controller.
cabinet that will not allow infrared beams to
reach its IR sensor, you will need to relay
beams with an external sensor.
Connect the external sensor to IR IN input.
Then, place the sensor in an unblocked
location at which you can easily point with
the remote controller.