ONKYO TX-NR1000 Manual De Instruções

 

13

 

A

 

Press this button to enter the setup mode for the 
listening mode. Turning the [SELECT/PRESET] 
allows you to select the listening mode. To confirm 
your selection and exit the setup mode, press the 
[SELECT/PRESET].

 

B

 

Press this button to enter the audio selector mode. 
Turning the [SELECT/PRESET] allows you to 
select the audio mode.

 

C

 

Press this button to enter the tone adjustment mode. 
Turning the [SELECT/PRESET] allows you to 
select the channel to adjust the tone. To adjust the 
tone level, turn the [CONTROL/TUNING].

 

D

 

Press this button to enter the Zone 2 configuration 
mode. Turning the [SELECT/PRESET] allows you 
to select the input source for Zone 2. Also, if you 
want to configure other Zone 2 settings such as 
standby/on setting, listening mode, volume 
adjustment, audio selector mode, and display 
settings, press this button first.

 

E

 

Press this button to enter the Rec/Zone 3 mode. 
Turning the [CONTROL/TUNING] allows you to 
select the input source for the Rec mode or Zone 3. 
Also, if you want to configure the setting for Zone 3 
including standby/on setting or volume adjustment, 
press this button first.

 

Recording and Zone 3 operations uses the same 
circuit and therefore cannot be used at the same 
time. 

 

F

 

For connecting a video camera or game device.

 

G

 

Press this button to enter the volume adjustment 
mode for Zone 3. Turning the [SELECT/PRESET] 
allows you to adjust the volume.

 

H

 

When the input source is FM or AM, turning this jog 
dial allows you to select the frequency to receive.
When used with other buttons, this [CONTROL/
TUNING] dial is used to select the mode settings or 
values. Also the dial is pressed to confirm the 
settings or values you select.

 

I

 

Press this button to enter the setup mode. First, 
select the parameter to change by turning the 
[SELECT/PRESET] and press the [SELECT/
PRESET] to confirm the parameter. Then, change 
the parameter value by turning the [CONTROL/
TUNING] and press the [CONTROL/TUNING] to 
confirm the value.

 

J

 

Press this button to return to the last menu. To exit 
from the setup mode, press the [SETUP] button again.

 

K

 

When the input source is FM or AM, turning this 
jog dial allows you to switch between your preset 
stations. When used with other buttons, the 
[SELECT/PRESET] dial is used to select the mode 
settings or parameters. Also the dial is pressed to 
confirm the settings or parameters you select.

 

L

 

Pressing this button enters the volume adjustment 
mode for Zone 2. To adjust volume, turn the 
[SELECT/PRESET].

 

M

 

Press to set the brightness of the front display. There are 
four settings available: normal, dark, very dark, and 
volume only.
For European models, this function can be operated 
only with the remote controller.

 

M

 

This button is only available on European models. 
Press this button to tune into the Radio Data System 
(RDS) for FM broadcasting. RDS was developed 
within the European Broadcasting Union (EBU) 
and is available in most European countries. Each 
time the button is pressed, the display changes from 
RT (radio text) to PTY (program type) to TP (traffic 
program) and then back to RT again.

 

N

 

Press to assign the radio station, to which you are 
currently tuned, as a preset channel or press to 
delete a previously preset station.

 

O

 

This button is used to select the Auto or Manual 
Tuning Mode.

 

P

 

This is a standard stereo jack for connecting stereo 
headphones.