ONKYO TX-NR1000 Manual De Instruções

 

65

 

You can also set the listening mode in advance for mul-
tichannel playback (Listening Mode Preset). To do so, 
select “Input Setup” 

 

→

 

 “Listening Mode Preset” 

 

→

 

 

“Multichannel” on the Setup menu to choose the pre-
ferred mode. This defaults to “Multichannel.”
See page 57 for details of the listening mode, and page 
97 for the listening mode preset.

 

You can specify detailed settings for the decode mode 
and the speaker environment for multichannel playback 
(Listening Mode Setup). See page 102 for details. 

 

The volume level of each speaker for multichannel 
sounds is different from the calibration level to be set 
with the test sound described on page 90. Adjustment 
made here is not reflected in playing other than the mul-
tichannel playback.

 

You can adjust the volume level in the range from 
–

 

∞

 

, –81.5 dB to 18.0 dB (when Relative is set for 

Volume Setup). 

 

You can also adjust the volume level with the 
input source button, the [AUDIO SELECTOR] 
button, and the [MASTER VOLUME] dial on the 
TX-NR1000/TX-NR5000E.

-

+

-

 

Speakers set by the Speaker Configuration sub-
menu on the Speaker/Output Setup menu are dis-
played on a one-by-one basis. 

 

You can adjust in the range from –12 dB to +12 
dB. The subwoofer can be adjusted in the range 
from –15 dB to +12 dB. 

+

-