ONKYO TX-NR3007 Guia Do Utilizador

69

You can adjust the brightness of the AV receiver’s dis-
play.

You can temporarily mute the output of the AV receiver.

Tip:
You can specify how much the output is muted with the 
“Muting Level” setting (page 110).

With the sleep timer, you can set the AV receiver to turn 
off automatically after a specified period.

If you need to cancel the sleep timer, press the [SLEEP] 
button repeatedly until the SLEEP indicator disappears.

To check the time remaining until the AV receiver sleeps, 
press the [SLEEP] button. Note that if you press the 
[SLEEP] button while the sleep time is being displayed, 
you’ll shorten the sleep time by 10 minutes.

Press the [RECEIVER] button, 
and then press the [DIMMER] 
button repeatedly to select: 
• Normal + VOLUME light on.
• Normal + VOLUME light off.
• Dim + VOLUME light off.
• Dimmer + VOLUME light off.
Alternatively, you can use the AV 
receiver’s [DIMMER] button (North 
American models).

Press the [RECEIVER] button, 
and then press the [MUTING] but-
ton.
The output is muted and the MUTING 
indicator flashes on the display, as 
shown.

To unmute the AV receiver, press the 
[MUTING] button again, or adjust the 
volume.
The Mute function is cancelled when 
the AV receiver is set to Standby.

Press the [RECEIVER] button, 
and then press the [SLEEP] but-
ton repeatedly to select the 
required sleep time.
The sleep time can be set from 90 to 10 
minutes in 10 minute steps.

The SLEEP indicator appears on the 
display when the sleep timer has been 
set. The specified sleep time appears on 
the display for about five seconds, then 
the previous display reappears.