ONKYO tx-lr552 Manual De Instruções
43
Advanced Operation
—Continued
The DVD multichannel input is for connecting a compo-
nent with individual 5.1-channel analog audio outputs,
such as a DVD player or MPEG decoder.
See “DVD Multichannel Connection” on page 22 for
hookup details.
This section explains how to select the DVD multi-
channel input for playback.
nent with individual 5.1-channel analog audio outputs,
such as a DVD player or MPEG decoder.
See “DVD Multichannel Connection” on page 22 for
hookup details.
This section explains how to select the DVD multi-
channel input for playback.
Notes:
• When the DVD multichannel input (Multi) is selected,
the Multichannel Direct (MLT Direct) listening mode
is selected.
is selected.
• While the DVD multichannel input is selected, the
Speaker Configuration settings on page 46 are
ignored, and signals from the multichannel input are
fed to the front left, front right, center, surround left,
and surround right speakers and subwoofer regardless
of those settings.
ignored, and signals from the multichannel input are
fed to the front left, front right, center, surround left,
and surround right speakers and subwoofer regardless
of those settings.
Adjusting the Volume of Individual
Speakers for the Multichannel Input
While using the multichannel input, you can adjust the
volume of individual speakers.
volume of individual speakers.
Note:
• You cannot select speakers that are set to No or Non
on the Speaker Configuration menu (see page 46).
• These settings are not the same as those in “Speaker
Level Calibration (Test Tone)” on page 28.
• These settings affect only the DVD multichannel input
and have no effect on the other inputs.
Using the DVD Multichannel Input
1
Press the INPUT SELECTOR
[DVD] button.
[DVD] button.
The input source changes to DVD.
2
Press the REMOTE MODE [AMP]
button followed by the [SETUP]
button.
button followed by the [SETUP]
button.
The DVD multichannel input needs to
be selected in the setup menus.
be selected in the setup menus.
3
Use the Up and Down [
]/[
]
buttons to select “4. Input Set,”
and then press [ENTER].
and then press [ENTER].
4
Use the Up and Down [
]/[
]
buttons to select “Audio,” and
then use the Left and Right [
then use the Left and Right [
]/
[
] buttons to select “Multi.”
5
Press the [SETUP] button.
The setup menu closes.
6
Start playback on your DVD
player.
player.
DVD
AMP
TUNER
ENTER
ENTER
ENTER
1
Press the REMOTE MODE [AMP]
button, and then use the [CH
SEL] button to select each
speaker.
button, and then use the [CH
SEL] button to select each
speaker.
Speakers are selected in the following
order.
order.
2
Use the [LEVEL–] and [LEVEL+]
buttons to adjust the volume.
buttons to adjust the volume.
The volume can be adjusted from –12
to +12 (–30 to +12 for the subwoofer).
to +12 (–30 to +12 for the subwoofer).
AMP
TUNER
CH SEL
Front left
Center
Front right
Surr right
Surr left
Subwoofer
LEVEL LEVEL
+
-
TX-LR552_En.book Page 43 Thursday, August 5, 2004 1:07 PM