ONKYO TX-NR801 Manual De Instruções

Página de 98
 
45
 
Using the Listening Modes
 
—Continued
 
THX:
 
 Changes the listening mode to the THX listening 
mode.
 
If the THX button is pressed
• While playing back Dolby Digital sources
 
Switches the THX Surround EX mode (Auto 
 
 
 On 
 
 
 Off) if the source is a THX Surround EX-compat-
ible source. For details, see “c. THX Surround EX 
(Dolby D)” on page 61.
 
• While playing back Analog/PCM sources
 
Switches the decoding mode (Pro Logic II Movie 
 
 
 
DTS Neo6:Cinema) for THX processing. For details, 
see “b. Decoder (2ch)” on page 61.
 
• While playing back DTS sources
 
Switches the DTS-ES mode from Auto 
 
 
 On 
 
 
 Off. 
Changing the DTS-ES mode allows you to enjoy the 
DTS THX Cinema, DTS-ES Discrete THX Cinema, 
and DTS-ES Matrix THX Cinema surround systems. 
For details, see “d. DTS-ES” on page 61.
Be aware that if surround back speakers are not con-
nected, or if the Surr Back/Zone 2 setting of the Surr 
Back/Zone 2 Sub-menu is set to “Zone 2,” the THX Sur-
round EX, DTS-ES Discrete, or DTS-ES Matrix listen-
ing modes cannot be selected.
 
DSP
 
 
/
 
:
 
 Changes the digital processing mode that is 
currently being input from the selected input source as 
shown below.
Mono, Theater-Dimensional, Mono Movie, Enhance
 
,
 
 
Orchestra, Unplugged, Studio-Mix, TV Logic, All Ch 
Stereo, Mono.
The digital processing modes available depend on the 
selected input source.
 
ALL ST (remote controller only):
 
 Changes to All Ch 
Stereo the listening mode for the input signal of the input 
source currently selected. If pressed, the corresponding 
setting in the Listening Mode Preset Sub-menu of the 
Setup Menu for the selected input source is also changed 
(See pages 56-57).
On the TX-NR801/TX-NR801E, use the DSP button for 
enabling the All Ch Stereo listening mode.
 
Relationship between input source and listening mode
 
Listening modes marked with the “
 
 
” can be selected. For columns that list a number of listening modes, the display 
will correspond to the format of the signal from the source media.
 
*1 On the TX-NR801/TX-NR801E, use the DIRECT/PURE AUDIO button for selecting these listening modes.
*2 Available only when the surround back speakers are connected to the TX-NR801/TX-NR801E.
*3 Available only when the input source is encoded in the DTS 96/24 format.
*4 Available only when the input source is encoded in the DTS-ES Discrete format.
*5 The DTS-ES Matrix listening mode is enabled when the input source is encoded in the DTS-ES Matrix format. When the input source is in 
DTS format but other than 6.1ch, and the surround setting for “DTS-ES” is set to “On,” the DTS-ES+Neo:6 listening mode is enabled.
 
Input source signal (display)
Analog/PCM (2ch) PCM fs= 96k
(2ch)
Dolby Digital
(3ch-5.1ch) 
DTS 
(5.1ch, 6.1ch) 
Digital Format
(DD/DTS) (2ch)
Digital Format
(Monaural)
Type of software
Button/Listening Mode
Tape, Video tape, 
Vinyl, Tuner, CD, 
MD, DVD (Stereo), 
LD, Digital Satellite
DVD
(96kHz/
24bit)
DVD,
Digital Satellite
CD, LD,
DVD 
DVD,
Digital Satellite
DVD 
PURE A
 
*1
 
Pure Audio
 
 
DIRECT
 
*1
 
Direct
 
 
 
STEREO
 
Stereo
 
 ✔
 
PLII Movie
 
 
 
PLII Music
 
 
DTS Neo:6 Cinema
 
 
DTS Neo:6 Music
 
 
Dolby Digital
 
 
Dolby Digital EX
 
*2
 
 
DTS 
 
 
DTS 96/24
 
 
*3
 
DTS-ES Descrete
 
*2
 
 
*4
 
DTS-ES Matrix
 
*2
 
/
DTS-ES + Neo:6
 
 
*5
 
THX Cinema
 
 
THX Surround EX
 
*2
 
 
Mono
 
 
Theater-Dimensional
 
 
Mono Movie
 
 
Enhance
 
 
Orchestra
 
 
Unplugged
 
 
Studio-Mix
 
 
TV Logic
 
 
ALL Ch Stereo
 
SURR
OUND/SURR
THX
DSP