ONKYO TX-NR901 Manual De Instruções
54
Basic Operation
—Continued
With the built-in tuner you can enjoy AM and FM radio
stations. You can store your favorite radio stations as pre-
sets for quick selection.
stations. You can store your favorite radio stations as pre-
sets for quick selection.
Tuning into Radio Stations
Notes:
• The tuner frequency changes in 0.1 MHz steps for FM
and 10 kHz steps for AM (0.05 MHz and 9 kHz
respectively on some models).
respectively on some models).
■
Listening to Stereo FM Radio Stations
When the TX-NR901 is properly tuned to a radio station,
the “
the “
TUNED
” indicators appear on the display.
When the TX-NR901 is properly tuned to a stereo FM
radio station, the “FM STEREO” indicator appears as
well.
radio station, the “FM STEREO” indicator appears as
well.
If the signal from a stereo FM station is weak, it may be
impossible to achieve good reception. If this happens,
press the TX-NR901’s [FM MODE] button to listen to
the station in mono (the “AUTO” and “FM STEREO”
indicators go off).
impossible to achieve good reception. If this happens,
press the TX-NR901’s [FM MODE] button to listen to
the station in mono (the “AUTO” and “FM STEREO”
indicators go off).
■
Specifying Radio Stations by Frequency
To select a radio station by entering its frequency, press
the remote controller’s [DIRECT TUNING] button, and
then use the number buttons to enter the frequency.
the remote controller’s [DIRECT TUNING] button, and
then use the number buttons to enter the frequency.
Presetting Radio Stations
You can store up to 40 AM and FM radio stations as pre-
sets.
sets.
Using the Tuner
1
Use the [TUNER] input selector
button to select either AM or FM.
button to select either AM or FM.
2
Use the TX-NR901’s TUNING Up/
Down [
Down [
]/[
] buttons to tune
into a station.
The following illustration shows the
tuner-related indicators on the display.
tuner-related indicators on the display.
To locate an FM station automatically,
press and hold the TUNING Up or
Down [
press and hold the TUNING Up or
Down [
]/[
] button for more than 1/
2 a second. The TX-NR901 scans the
FM band up or down, depending on
which button you pressed, stopping
when a stereo FM station is found.
FM band up or down, depending on
which button you pressed, stopping
when a stereo FM station is found.
PHONES
ZONE
2 LEVEL
STEREO SURROUND
THX
DSP
REC OUT
ZONE
2
OFF
DIMMER
SETUP
ENTER
RETURN
S VIDEO
AUDIO
VIDEO
L
R
DIGITAL
VIDEO
5 INPUT
STANDBY/ON
STANDBY
MASTER VOLUME
TUNER
PHONO
NET AUDIO
C D
TAPE
DVD
VIDEO
3
VIDEO
5
VIDEO
4
VIDEO
2
VIDEO
1
VCR
2
VCR
1
ZONE
2 (
)
GRN
REC (
)
RED
AUDIO
SELECTOR
DISPL AY
PURE AUDIO
UPSAMPLING
OFF
ON
POWER
MEMORY
FM MODE
PRESET
TUNING
CLEAR
2
1
TUNER
TUNING
AUTO indicator
TUNED indicator
FM STEREO
indicator
indicator
Frequency
Band
1
Tune into a radio station as
explained previously.
explained previously.
2
Press the TX-NR901’s [MEMORY]
button.
button.
The preset number flashes.
3
Use the PRESET [
]/[
] buttons
to select a preset from 1 to 40.
4
Press the [MEMORY] button to
store the preset.
store the preset.
The preset number stops flashing.
You can name your presets for easy
identification (see page 73).
identification (see page 73).
PHONES
ZONE
2 LEVEL
STEREO SURROUND
THX
DSP
REC OUT
ZONE
2
OFF
DIMMER
SETUP
ENTER
RETURN
S VIDEO
AUDIO
VIDEO
L
R
DIGITAL
VIDEO
5 INPUT
STANDBY/ON
STANDBY
MASTER VOLUME
TUNER
PHONO
NET AUDIO
C D
TAPE
DVD
VIDEO
3
VIDEO
5
VIDEO
4
VIDEO
2
VIDEO
1
VCR
2
VCR
1
ZONE
2 (
)
GRN
REC (
)
RED
AUDIO
SELECTOR
DISPL AY
PURE AUDIO
UPSAMPLING
OFF
ON
POWER
MEMORY
FM MODE
PRESET
TUNING
CLEAR
3
2, 4
MEMORY
ch
PRESET
MEMORY
TX-NR901_En.book Page 54 Wednesday, October 1, 2003 9:44 AM