ONKYO TX-NR901 Manual De Instruções

Página de 105
 
65
 
Advanced Operation
 
—Continued
 
This section explains how to record the current input 
source, how to record an input source while listening or 
watching another input source, and how to record from 
separate audio and video sources.
 
Unless you have the full consent of the copyright 
holder, copyright laws prohibit using your recordings 
for anything other than personal enjoyment!
Notes:
 
• The surround sound and DSP listening modes cannot 
be recorded.
• Copy-protected DVDs cannot be recorded.
• You cannot record from the multichannel input.
• Digital audio fed to the DIGITAL IN COAX/OPT 
inputs is output by the DIGITAL OUT OPT outputs. 
MP3, WMA, WAV, and other files played over Net-
Tune are output only by the analog audio outputs.
• Various restrictions apply to digital recording. Refer to 
the manuals supplied with your digital recording 
equipment for more details.
• Digital input signals are output by only the digital out-
puts, and analog input signals are output by only the 
analog outputs. There is no internal conversion from 
digital to analog or vice versa.
• DTS signals will be recorded as noise, so don’t 
attempt analog recording of DTS CDs or LDs.
 
Recording the Current Input Source
 
You can record the current input source as follows.
 
Recording a Separate Input Source
 
While enjoying one input source, you can record from a 
separate input source. You could, for example, watch a 
DVD while recording a CD to tape.
 
Notes:
 
• Since the Zone 2 function and the REC OUT outputs 
use the same circuitry, you cannot record from sepa-
rate sources and use Zone 2 at the same time.
• To turn off the REC OUT outputs (i.e., TAPE OUT, 
VIDEO 1 OUT, or VIDEO 2 OUT), press the [REC 
OUT] button, and then press the [OFF] button within 
eight seconds.
 
Recording
 
1
 
Use the input selector buttons to 
select the AV component that 
you want to record.
 
2
 
Press the [REC OUT] button 
repeatedly until “Rec Sel: 
SOURCE” appears on the dis-
play.
 
Tip:
 
 Press the [REC OUT] button twice 
to quickly select “SOURCE.”
The current input source can now be 
recorded by the recorder connected to 
the TAPE OUT, VIDEO 1 OUT, or 
VIDEO 2 OUT outputs.
 
3
 
Start recording on the recorder.
 
See your recorder’s manual for more 
information.
 
4
 
Start playback on the source AV 
component.
 
If you select another input source dur-
ing recording, the newly selected input 
source will be recorded.
REC OUT
 
1
 
Press the [REC OUT] button.
 
2
 
Within eight seconds, press the 
input selector button for the 
input source that you want to 
record.
 
The name of the input source selected 
for recording appears on the display.
The specified input source can now be 
recorded by the recorder connected to 
the TAPE OUT, VIDEO 1 OUT, or 
VIDEO 2 OUT outputs.
 
3
 
Start recording on the recorder.
 
See your recorder’s manual for more 
information.
 
4
 
Start playback on the source AV 
component.
REC OUT
3
5
4
2
1
2
1
DVD
VIDEO 
VCR 
VIDEO 
VCR 
VIDEO 
VIDEO 
VIDEO 
TAPE
TUNER
PHONO
C D
NET AUDIO
TX-NR901_En.book Page 65 Wednesday, October 1, 2003 9:44 AM