ONKYO TX-SR307 Manual Do Utilizador

38

To turn the speakers on or off, use the AV receiver’s SPEAKERS 
[A] and [B] buttons, or use the remote controller’s [SP A/B] button.
Pressing the remote controller’s [SP A/B] button cycles through the following 
settings:
Speaker Set A

→Speaker Set A&B→Speaker Set B→Off

Note that while speaker set B is on, speaker set A is reduced to 2.1-channel 
playback.

See page 13 for more information about speaker sets A and B.

Start playback on the source component.
To watch a BD, DVD, or other video source, on your TV, select the video input 
that’s connected to the AV receiver’s HDMI OUT, COMPONENT VIDEO 
OUT, or MONITOR OUT.
On some DVD/BD players, you may need to change the digital or HDMI audio 
output settings.

q]/[w] button.

Since the AV receiver is designed for home theaters, it has a wide volume range 
for precise adjustment. The volume can be set to Min, 1 through 79, or Max.

Select a listening mode and enjoy!
See “Using the Listening Modes” on page 49.

q, w

↑