ONKYO TX-SR500 Manual Do Utilizador

9

1

-

0

=

~

#

2

3

4
5

6
7

9

8

!

@

Explanations on this page are for controlling the TX-SR500/
TX-SR500E. To operate other components, see “Using remote
controller” on pages 34 through 35, and “Pre-programming remote
controller (North American models only)” on pages 36 and 37.

For operational instructions, refer to the page indicated in brackets.

1

For setting the sleep time.

This button is provided only on the remote controller.

2

Turns on the TX-SR500/TX-SR500E or put it in standby.

3

Press to change the listening mode.

4

Press to activate/de-activate Cinema Filter function.

5

Press to change the late night setting.

6

5/∞ buttons [20, 28]

For setting the output levels for each speaker.

These buttons are provided only on the remote controller.

7

Press to select an audio input signal format other than TUNER.

8

For selecting the input source.

9

Activates the mute function.

This button is provided only on the remote controller.

0

2/3 button [25]

For selecting a tuner preset channel.

-

For adjusting the brightness of the front display.

=

For selecting the component to be operated by the remote
controller.

~

Press to switch the speaker systems in use between A and B.

!

Press to adjust bass, treble, late night function and cinema filter
function setting.

@

2/3 button [29]

Press to adjust the values and parameters of the mode selected
using the AUDIO ADJUST, SPEAKER ADJUST or AUDIO
SELECTOR button.

#

5/∞ button [21, 24]

For adjusting the volume.

1

-

0

=

~

#

2

3

4
5

6
7

9

8

!
@