ONKYO TX-SR505 Guia Do Utilizador

 

34

 

The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.

To turn the AV receiver off, press the [STANDBY/ON] button again. The AV receiver 
will enter Standby mode. To prevent any loud surprises when you next turn on the AV 
receiver, always turn down the volume before you turn it off.

To ensure smooth operation, here’s a few easy steps to help you configure the AV receiver before you use it for the 
very first time. These settings only need to be made once.

■ Do the automatic speaker setup—this is essential!

If you’ve connected any speakers with an impedance of between 4 and 6 ohms, see “Minimum Speaker Imped-
ance Setup” on page 35 before the automatic speaker setup (not North American model).

■ For TX-SR505 North American model/TX-SR505E/TX-SR575

Have you connected a component to an HDMI IN or the COMPONENT 
VIDEO IN (TX-SR575 only)?
If you have, see “Video Input Setup” on page 38.

■ Have you connected a component to a digital audio input?

If you have, see “Digital Audio Input Setup” on page 39.

■ Have you connected an Onkyo MD recorder, CD recorder, 

or RI Dock?
If you have, see “Changing the Input Display” on page 39.

CD recorder, MD recorder, 
RI Dock

TX-SR505_En.book Page 34 Tuesday, January 30, 2007 11:53 AM