ONKYO TX-SR603X Manual De Instruções

 

27

 

You only need to use one of the following connection 
methods.

 

■

 

Use a composite video cable to connect the AV 
receiver’s V DVD IN jack to the composite video output 
on your DVD player, as shown. 

 

■

 

Use an S-Video cable to connect the AV receiver’s 
S DVD IN jack to the S-Video output on your DVD 
player, as shown.

 

■

 

Use a component video cable to connect the AV 
receiver’s COMPONENT VIDEO IN1 jacks to the com-
ponent video output on your DVD player, as shown.
• Your TV must also be connected via component video.

 

■

 

• Use a coaxial digital audio cable to connect one of the 

AV receiver’s COAXIAL DIGITAL IN jacks to the 
coaxial output on your DVD player, as shown.

OR

• Use an optical digital audio cable to connect one of the 

AV receiver’s OPTICAL DIGITAL IN jacks to the 
optical output on your DVD player, as shown.

Initially, the COAXIAL IN 1 jack is assigned to the 
DVD input source. If you connect your DVD player to a 
different digital input, you’ll need to reassign the DVD 
input source (see page 42).

 

■

 

Even if your DVD player is connected digitally (optical 
or coaxial), to use 

, or to record audio from your 

DVD player, you’ll need to make an analog connection 
as well.
Use an analog audio cable to connect the AV receiver’s 
DVD IN L/R jacks to the analog audio output on your 
DVD player, as shown.
If your DVD player has stereo (L/R) and multichannel 
outputs, be sure to use the left and right outputs.

Connect one 
or the other

TXSR603X.book 27 ページ ２００５年８月３日 水曜日 午後２時２分