ONKYO TX-SR603X Manual De Instruções
39
First Time Setup
—Continued
■
How to Verify the Measurement Results
By selecting “Check the Results” at step 4, you can dis-
play the following screen to confirm the measurement
results.
play the following screen to confirm the measurement
results.
3
Press [ENTER].
The automatic speaker setup starts.
The test tone is output by each speaker
in turn, measured by the microphone,
and the speaker settings set accordingly.
The whole process takes about 2 minutes.
The test tone is output by each speaker
in turn, measured by the microphone,
and the speaker settings set accordingly.
The whole process takes about 2 minutes.
If any extraneous noise is picked up by
the microphone, the automatic setup
may not work correctly, so be careful.
the microphone, the automatic setup
may not work correctly, so be careful.
4
Once the measurement is com-
pleted, the following completion
screen appears.
pleted, the following completion
screen appears.
Use the Up and Down [
]/[
]
buttons to select any of the fol-
lowing options, and then press
[ENTER].
lowing options, and then press
[ENTER].
Apply the Results:
Validates the measurement results and
closes the screen. Normally you may
want to select this option. Continue
with step 5.
closes the screen. Normally you may
want to select this option. Continue
with step 5.
Check the Results:
Displays the measurement results for
your reference. Continue with “How to
Verify the Measurement Results”
described below.
your reference. Continue with “How to
Verify the Measurement Results”
described below.
Retry:
Retries measurement. Return to step 2.
Retry with Test noise Level up:
Retries measurement with the test
sound at high volume level. Return to
step 2.
sound at high volume level. Return to
step 2.
Cancel:
Closes the screen without validating
the measurement results. Continue with
step 5.
the measurement results. Continue with
step 5.
ENTER
ENTER
ENTER
5
Disconnect the speaker setup
microphone.
microphone.
To cancel the automatic setup while it’s
in progress, disconnect the micro-
phone.
in progress, disconnect the micro-
phone.
Use the Up and Down [
]/[
]
buttons to select the item that
you want to check, and then
press [ENTER].
you want to check, and then
press [ENTER].
Press the [RETURN] button to return to
the previous display.
the previous display.
ENTER
ENTER
1 Warning
2 Number of speakers and their sizes
3 Distance from each speaker to the
2 Number of speakers and their sizes
3 Distance from each speaker to the
listening position
4 The optimum volume level for each
speaker
5 The level adjustment for individual
frequency range covered by
respective speaker
respective speaker
TXSR603X.book 39 ページ ２００５年８月３日 水曜日 午後２時２分